Cheers guys! Lows and spacers will hopefully be done by mid May! :')
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
Peter's Leon - *Mapped* *Soon to be Stealth*
- Thread starter Petey41
- Start date
Bit of an update, fixed the door seal issue as water was getting in the driver's side.
The drivers door was by far the worst, as the seal at the bottom was completely shot!
Bit of bad news, I said a while back my remote locking was playing up, the central locking is now doing the same. Turns out the actuator is disengaging the driver's door lock after I lock it so a new one is on the way, with plans to get the remote locking working then too!
Sent from my HTC One using Tapatalk
The drivers door was by far the worst, as the seal at the bottom was completely shot!
Bit of bad news, I said a while back my remote locking was playing up, the central locking is now doing the same. Turns out the actuator is disengaging the driver's door lock after I lock it so a new one is on the way, with plans to get the remote locking working then too!
Sent from my HTC One using Tapatalk
No mate, not as of yet, weather hasn't been quite right, if I get a chance this week it might get done! Have a few other surprises on the way this week and they'll be revealed this week or next all being well!
Sent from my HTC One using Tapatalk
I will for sure mate! No power upgrades as of yet, still on aesthetics! Might have a wee map by the summer yet!
Sent from my HTC One using Tapatalk
So I did some more work last night, into the early hours, will put a proper update up when I can, hopefully later on today!
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
Came home from work last night at half 9 to some goodies, and had to go and fit them. Started off with my radio, bought a Pioneer DEH-X5600BT which has the excellent Parrot hands free kit, would recommend this to anyone! Was a bit fidgity getting the wire through the dash but perseverance sorted it!
I then fitted my surrounds for my number plates and my metro plates, really sets the car off!
Metro plates are the thinner font ones, at the bottom.
I then removed the cd changer and fitted the extra glove box.
I also fitted Phillips xtreme vision bulbs last night, but I have yet to try them out. Left is new bulbs and right is the old.
Today, then I gave her a quick clean and polish and this is how she currently sits.
I also fitted a fabia wiper!
I then fitted my surrounds for my number plates and my metro plates, really sets the car off!
Metro plates are the thinner font ones, at the bottom.
I then removed the cd changer and fitted the extra glove box.
I also fitted Phillips xtreme vision bulbs last night, but I have yet to try them out. Left is new bulbs and right is the old.
Today, then I gave her a quick clean and polish and this is how she currently sits.
I also fitted a fabia wiper!
Thanks so much guys, finally got it to the stage that I look twice at it when I'm walking away 
@ibizaboi I'll get them up for you tomorrow, not at home at the minute
Sent from my HTC One using Tapatalk
@ibizaboi I'll get them up for you tomorrow, not at home at the minute Sent from my HTC One using Tapatalk
Hahah, i know exactly what you'r talking about, it's awesome had the same thing when i finished the foil recoloring of my car
@ibizaboi sorry for the late response;
Wiper: http://www.ebay.co.uk/itm/111093557381?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Surrounds:http://www.ebay.co.uk/itm/SEAT-CUPR...arts_Vehicles_CarParts_SM&hash=item258b36e7ac
Wiper: http://www.ebay.co.uk/itm/111093557381?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Surrounds:http://www.ebay.co.uk/itm/SEAT-CUPR...arts_Vehicles_CarParts_SM&hash=item258b36e7ac
Detail/Clay Bar
So I managed to get a bit of time to get the car clay barred. I have to say the meguiars stuff was so easy to use and left the beading on the car absolutely superb! Here was a few photos during the claying:
Then I cleaned her up and took some photos
Hopefully going to get tints and stickers done in the next month or so, as well as finally getting the remote locking fixed. Few wee other ideas and surprises lined up!
So I managed to get a bit of time to get the car clay barred. I have to say the meguiars stuff was so easy to use and left the beading on the car absolutely superb! Here was a few photos during the claying:
Then I cleaned her up and took some photos
Hopefully going to get tints and stickers done in the next month or so, as well as finally getting the remote locking fixed. Few wee other ideas and surprises lined up!
I wouldn't be sure mate, but I'd say it was the first time that car was ever clayed! haha Probably around 2-3 hours I would guess!
Similar threads
