Porsche 911 Turbo alloys?

Reuvers

I is a Dutch man!
Oct 30, 2007
3,374
0
Netherlands
Hello guys,

just need a little bit of help/reassurance

I can do a great deal on some (almost) new (replica) Porsche alloy wheels. Its the 911 turbo 5 spokes which bend off slightly to the side...

The size of the wheels is 215-40-17 and I will put on 10mm adapters on the front (from 4x100 to 5x100) and 20mm on the back.

What would that look like? Good choice of alloys, or look for something better?

By the way this all with tires that have 6mm tracking (or how you call that??) and the adapter spacers for under 500 Euro's. That's roughly 399 quid.

What you guys think?
 

Forbez

Huge Member!
Feb 11, 2004
5,878
1
S.Wales
Visit site
I think you may find that the offset is 5x130 for the wheels, and not 5x100.

I looked at these a little while back, but when I found you couldnt get them in 4 stud, that was the end of my interest.

They will look good though!
 

Reuvers

I is a Dutch man!
Oct 30, 2007
3,374
0
Netherlands
Its these alloys (alloy is the same but not the ones I am looking at but can't get a good pic of that up)

12213_1.jpg
 

Reuvers

I is a Dutch man!
Oct 30, 2007
3,374
0
Netherlands
I would want to put 20mm on the back (i already have these on now but not adapters) but wouldn;t the front stick out too much? Also because the tire size is 215?
Or what size adapters wpould you people suggest? 20mm back and 15 front? or...?