Rattle rattle rattle!

[Stuie]

i have the same rattle on the dial surrond, driving me insane now

 

[A13x]

I have got a rattle coming from the back of my car i think it is the boot lock solonoid but i dont seem to be able to stop it. does anyone else have this problem?

 

[Deejay]

I have got a rattle coming from the back of my car i think it is the boot lock solonoid but i dont seem to be able to stop it. does anyone else have this problem?

yup same as, rattles to the bass notes of my subs, most annoying. had all the usual dash and seat rattles on mine since day one, 5 years ago. ive learned to live with em cos i give up trying to fix

ps- u live near trafford centre?

 

[Craig!]

Ahh so I'm not the only person with the dash rattle!! Same symptons, same tempoary cures, etc.

 

[A13x]

ps- u live near trafford centre?

Yeah about five minutes away u?

I havn't given up with the rattles yet still gonna keep trying to find them all!

 

[Molehill_Mike]

The rattle in my boot I get when I boot it, think the Milltek vibrates alot, but also the plastic interior of the boot itself, (the bit that opens) can be loose, number plate foam is good for this, or silicone.

Mike

 

[Undezcupra]

i have the same rattle on the dial surrond, driving me insane now

Tighten the screw up underneath thedash over the dials

 

[Beaker™]

Anyone know how to remove the glovebox then? I have a rattle in the dash between the top of the glovebox and the passenger airbag....

 

[thermalp4]

BEAKER: I've just sorted that one mate. If you take out the plastic piece in the passenger footwell hel on by 2 screws you can look up and under the glove box and you will see a metal box type of thing. Its loose in mine and if you move it about the chirping stops.

Bill Brockbank told me how to remove the glovebox by removing the hinges of the glove box and also the screws inside.

I can't for life of me see how you can get the hinges out?

If we could get the glovebox out we could secure that metal box thing so that it wouldnt rub.

 

[Beaker™]

BEAKER: I've just sorted that one mate. If you take out the plastic piece in the passenger footwell hel on by 2 screws you can look up and under the glove box and you will see a metal box type of thing. Its loose in mine and if you move it about the chirping stops.

Bill Brockbank told me how to remove the glovebox by removing the hinges of the glove box and also the screws inside.

I can't for life of me see how you can get the hinges out?

If we could get the glovebox out we could secure that metal box thing so that it wouldnt rub.

Nice one matey, will have a crack at that tomorrow afternoon