Tell

Updating the inbuilt Mib2 Satnav / Mib2 tricks and Mib1

metomurti

Active Member
Apr 26, 2013
123
0
Has not anybody downloaded and used this new map yet? If I had car I would already install the new map.
 

roger7248

Active Member
Sep 28, 2013
102
2
Bicester, Oxon
This doesn't appear to be true. It's all over SEAT's website in the services section that they check and provide software updates free of charge as part of a service.

I really hope you are right, but I am guessing their promise..

"Check for outstanding vehicle safety, software and product enhancements on SEAT's database"

relates to ECU etc software, not sat nav. Unless the VW/Skoda updates work, there may be a few "discussions" in a few months time.

Has not anybody downloaded and used this new map yet? If I had car I would already install the new map.

A little bit of provado knowing you don't have to do it. I should add I am very loathe to be the guinea pig, being a 65 year old techno phobe, what if........? Especially since everything is brand new and hunky dory at present.
 
Last edited:

rcopus

Active Member
Jun 6, 2012
270
8
Midlands
Apols Roger, my reply was specifically around Kugamans comment about any sort of software.
Unfortunately I'd tend to agree with you about the satnav updates.
 

eclat01

Seat Leon Mk3 SE 1.6 TDI
Aug 4, 2013
10
0
Malmesbury
I was told at the time of purchase, "all map updates are foc", I questioned this and was told without question by my dealer, map updates are free for three years...
Another case of dealers not singing from the same hymn sheet again...
 

roger7248

Active Member
Sep 28, 2013
102
2
Bicester, Oxon
I was told at the time of purchase, "all map updates are foc", I questioned this and was told without question by my dealer, map updates are free for three years...
Another case of dealers not singing from the same hymn sheet again...

Maybe if we find a dealer who will do it, there may well be a queue of cars wanting that dealer to do their service. Now that could be a good marketing tool!!!!

Or even when service time comes around ask your dealer if updating is included. If he says "no", say thanks, but you will be checking other dealers out.
That may make them change their tune.

Hopefully this thread will keep running for a few months yet.
 
Last edited:

Shiners

Active Member
Jun 29, 2013
78
1
Scotland
My car was brand new last week! Actually bought ex-docks, so I'm guessing a very newly built car. Unless of course they have thrown an old SD card in, instead of a new one.

Unfortunately packaging box doesn't give any clues.

Would be useful if others could list their codes and dates so we could maybe get an idea about what is happening - unless anybody has an in at Seat.

My FR184 Tech was built in July and and delivered Sept 2nd with Version 034.
 

dephead2004

Active Member
Aug 3, 2013
918
12
A call to SEAT UK CS elicited this response. AT present the map updates are chargeable £100-£120. I pointed out that their sister companies Skoda and VW have a dedicated section for updating the software FOC. There is a VW/Skoda page that takes you to a NAVTEQ Skoda VW branded landing page with full instructions for downloading and installing the updates.
CS said that SEAT UK were looking at sharing good practice within the group and that in the future thye might have a similar system.
He also offered that updates were released around September and March via the NAVTEQ site

http://www.navigation.com/is-bin/IN...t=application/ApplicationFrame_campaign_light

http://www.navigation.com/is-bin/IN...t=application/ApplicationFrame_campaign_light
 

Shiners

Active Member
Jun 29, 2013
78
1
Scotland
Enlightening post. Can anyone see SEAT UK charging those sums for updates now, when their parent company does not...?
 

rcopus

Active Member
Jun 6, 2012
270
8
Midlands
Interestingly the German configurator shows a €120 option for 'MapCare' which I believe would be the updates...
Looks like they won't be free in the SEAT brand.
 

dw911

Active Member
Mar 30, 2013
1,036
6
While I was searching the net today I found some good information sources about the navigation system updates.

As you know navigation system works with the sd card that is installed at slot 2. All the map is installed in it and system uses these map from sd card. So if you can update the map in this sd card, you will always have the updated maps.

Today vw's discover media, skoda's amundsen and seat's 5,8 inch navigation systems work at the same way. At the links below you can find discover media's and amundsen's map updates. They are most efficaciously same. And I think it is also same for Seat's system.

1)For VW: http://www.navigation.com/is-bin/IN...t=application/ApplicationFrame_campaign_light

How to update: http://www.navigation.com/is-bin/IN...t=application/ApplicationFrame_campaign_light

2)For Skoda: http://www.navigation.com/is-bin/IN...dsen&&NewDomainName=Navteq-NavteqEurope-Site&

How to update: http://www.navigation.com/is-bin/IN...ions&&NewDomainName=Navteq-NavteqEurope-Site&

These files are approximately 4,5 GB.

If friends who have navigation system in their Leons can try this and inform us, we will be very happy. Thanks. And you do not have to install anything to your car's system. Just download the map. Put it in to sd car and locate it to slot 2. If it doesn't work you can locate your original sd card. That is all.

Note: These map updates are free for VW and Skoda now. For example if you want to update your Opel's maps, it costs 99 euro. Really expensive.

Both VW and Skoda update links point to one and same file:

http://vw.download.navigation.com/MIB_Std_Single_Files_EU_12Q3/P34_N60S3MIBS2_EU_NT_Q3.12.7z

So, it is highly likely that the update will work also for the SEAT navigation system.

I have ordered my car with the navigation so I really hope I can get free updates. I am not gonna pay for updates, that's ridiculous. If I have to pay, I'll take updates illegally. It's just silly to ask money for updates while you may have them free on any other device and even on other VW groups cars.

I've downloaded the map update archive and uncompressed it on my HDD for examination. And here's a very promising discovery I made. In the following path:

markets\eu\map\styles

there are 4 folders named respecitvely 1, 2, 3, 4. The structure of those folders is same and the interesting part is in the subfolder named "Font". Each of the 4 font folders contains different files preffixed respectively:

1 - AudiTypeSemi*.ttf
2 - VWThesis*.ttf
3 - SkodaProScreen-*.ttf
4 - SEAT MetaStyle-*.ttf

So, I guess the navigation software is the same on all 4 brands and it's only the different UI skins that are different with respective icon sets, fonts, etc. That's why it is one and same update file for Skoda and VW and it most certainly works also for Audi and SEAT.


Hi all, in my quest to update my satnav I used the info the two members kindly posted up and Cybergene discovered the seat connection inside the files

I came across the golf download back in march whilst trying to add speed camera poi's to the infotainment system,but wasn't sure it could be used on the seat until Cybergene post the above info.
I've nearly craked adding speed camera poi's to the satnav and will post up a file once I get it to work correctly

Anyway back to the point of the post

Haa anyone had any luck loading these updates into their Leon?
I've put the updated files onto an sd card and loaded it into my Leon, but it loads but says no string found?

Do I need to break the files down more, load less or maybe arange the files some other way?

I loaded them to the sd card using the instructions that skoda/vw use for downloading their files

Has anyone have any suggestions?

As unless seat decide tofollow vw's lead and give us free updates, working out how to get these free updates to work would be very useful for us mk3 owners
 

jpwharmby

Active Member
Nov 1, 2006
11
0
Kingston, Surrey
I have tried this too with the 36 version - started by doing a file by file comparison on the existing data with the new data. Lots of files the same, plenty of differences in the config files - but mainly where additional items have been added to POI, the map data itself was different but that was expected too.

You HAVE to use the same card as the existing, but just make a backup before you start fiddling and all is ok - that was suggested earlier, but you can never repeat enough about backups after I have screwed myself over so often by not! Tried a Class 4 and Class 10 8gb card, but the sizes were different than the car's own card - maybe that's how the system tells them apart.

Straight copy to the new card - errors with invalid map data after trying to load for a while, even copying the maps alone with the rest of the existing folder structure didn't work so there must be something causing the error within the map files themselves (right?)

Opening the map files was no help, I haven't managed to find an app that reads them yet so they were just garbled....will carry on looking though.

All the POI info is all in XML format so easily checkable and changeable if you know XML....pretty dull though ;)

No luck so far but will keep on trying stuff.
 

CyberGene

Active Member
Apr 26, 2008
306
1
Sofia, Bulgaria
I have also tried with the 036 update over the original SD card but with no luck :( I'd hate it if I have to pay for SEAT updates when other brands get their updates for free.
 

Taff

Full Member
Jun 10, 2002
82
0
South Wales
I wonder if there is a system like on the Garmin GPS devices where they need to be signed/activated somehow. On Garmin devices where the content is on SD card / microSD, the physical card itself has a serial number and a special file has to have the correct string/code associated with the cards serial number to work.

I wonder if this is the same case for Leon mk3 SATNAV systems. It would be interesting to perform a binary diff from one owners 'Factory' SD card against another 'Factory' SD card (same release version). It may show a file or two different which might give a clue to this puzzle...
 

jpwharmby

Active Member
Nov 1, 2006
11
0
Kingston, Surrey
Good thoughts there, it could be worth checking two owners SD cards to see if there is any difference....anyone close to anyone else with the same update on their cards?
 

Taff

Full Member
Jun 10, 2002
82
0
South Wales
Reading some other forums it seems that the SD card data in root directory "DbInfo.txt" contains information that seems to marry up with numbers stored in the ECU.

I read "...validated through the J794 module"
<CODE>
Address 5F: Information Electr. (J794) Labels: None
Part No SW: 5F0 035 846 HW: 5F0 035 846
Component: MU-S-N-ER 039 0132
Serial number: E1F01411120767
Coding: 04730001D70A000021110001000900002F0306040100010046
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_MUStd6C1PASE 002027
ROD: EV_MUStd6C1PASE_SE37.rod
VCID: E5CA304AE44AF7369D5

Media Player Position 1:
Subsystem 1 - Part No SW: 5F0 919 603 A HW: 5F0 919 603 A
Component: ABTmin_Std_Nv H45 0020
Serial number: SEZ8Z9M56001B8

Engine Control Module 2:
Subsystem 2 - Part No SW: 5F0 919 866 C HW: -----------
Component: ECE 2013 --- 0021
Serial number: --------------------
</CODE>

This tallies up with the number on the SD card DbInfo.txt
<QUOTE>
...
PartNumber4="5F0919866C "
...
ApplicationSoftwareVersionNumber="0021"
SystemName=" ECE 2013 "
</QUOTE>

Perhaps someone has already tried using the SD card, update with new maps, but use the old DbInfo.txt? Otherwise using a VCDS and read and modify the info for J794 module (if accessible)?

Just sharing information. I could try first option since I don't have a cable for VCDS (yet)
 

Taff

Full Member
Jun 10, 2002
82
0
South Wales
Just an interesting update.

Last night I decided to try to duplicate/clone the SD card as I was worried about possible partition/hidden data as a form of protection. I discovered that the SD card supplied with the car (SEAT Navigation AT Europa V2) has the part number AF8GSDP but has a capacity of 8.3GB not the usual 8GB as other commonly available SD cards you can buy in the shops.

I think this in itself is a form of protection and helps the NAV unit authenticate if its a valid device (I am making big assumptions here).

Needless to say my clone of the SD card onto a 16GB SD partitioned exactly like the original one didn't work. Also using a standard 8GB SD card formatted to FAT32 with the files copied from the original also fails to work.

I will need to experiment with the SD that came with the car from now on.
 

Andy

Active Member
Nov 12, 2013
379
0
Ayrshire, Scotland
You can always back up the original SD card and put it back on when you've finished tinkering
Taff.

Popping AF8GSDP into Google throws up what appears to be just a generic 8GB SD card, its weird your getting a size of 8.3GB when you would normally end up with sub 8 due to formatting.
 

Taff

Full Member
Jun 10, 2002
82
0
South Wales
Not succeeded yet!

Loaded SW ver. 036 on the SEAT SD card after formatting it. The SatNav unit tries to check the database and after some time it pops up a message "The navigation data in the SD card are not valid. Please check data".

I then did a quick swap of the DBInfo.txt from the original and tried again. This just means the system endlessly checks the database and never comes up with the map (left it trying for 10mins).

I assume there must be something coded in the actual files on this release, so for the time being I am going to revert back to the original and then hand change/update the files I think I need. I'll also do a HEX search incase some key part numbers popup. If they do it might be worth hacking the files with the old DBInfo.txt

If I had the VCDS cable I could try the update of the J794 module, as I think hacking the file system is not really the way to go.
 
Progressive Parts, performance parts and tuning specialists