Wheel spacer options

[Zipcode]

Hey Damien

I'm running a MK2 Cupra R with stock 19's and H&R 30mm lowering springs. I am looking to get the arches filled a little better.
What size would you recommend for the front and back?
I was thinking about 8mm front and 12mm rear. What are your thoughts.

I'd be looking for a complete package with extended bolts and locking nuts to suit. Is this something you can facilitate?


Sent from my iPhone using Tapatalk

 

[Damian @ DPM]

Morning,

Thank you for your post.

I'd agree with 8mm front and 12mm rear or if you wanted to really push them out 10mm front and 15mm rear but you would increase the risk of rubbing with the wider sizes.

The spacers come with the extended bolts but we don't do the locking bolts.

Damian @ DPM Performance

 

[Zipcode]

Thanks Damian

I'll call you over the next day or two to place the order.
Any recommendation who I can contact for locking nuts and what bolt lengths I should be getting? Also, stock wheels bolts are radius correct?

 

[Damian @ DPM]

No problem.

McGard sell longer locking wheel bolts and yes we'll be able to tell you what size bolts you need but this will depend on what size spacers you go for. Yes the standard SEAT wheels use a radius head bolt.

Damian @ DPM Performance

 

[Zipcode]

Thanks again for your help and advice Damian. Looking forward to getting my delivery.


Sent from my iPhone using Tapatalk

 

[Damian @ DPM]

No problem, thank you for your order.

Damian @ DPM Performance