Guy just after some advice. Im trying to wire in some drls so i want them to come on with the ignition is there anything in the engine bay i can tap into?
wiring in DRLs
- Thread starter RaviR50
- Start date
I dont know the answer to this (sorry!) but, can you put up some pics when you have them installed please?!
The relays on the right hand side of the bulkhead both switched with ignition. Thin purple wires i finks.
There is a thread on here somewhere, the guy who did it wired them into the existing light switch by removing one of the wires and inserting it it an empty slot which then allowed the side lights to switch on with ignition.
All you'd then need to do is take a feed from the side lights.
All you'd then need to do is take a feed from the side lights.
Not exactly the same issue bit something I was wondering - I have removed my passenger side fog light to create a cold air feed and never really use my front fogs anyway. Could I use the plug from the fogs to switch on my radiator fans?
The fans haven't worked since I've had the car and front fogs aren't a necessity so wondering if this might work rather than stripping out the fans completely for new ones or wiring in the resistor mod.
Cheers and sorry for the hijack!
The fans haven't worked since I've had the car and front fogs aren't a necessity so wondering if this might work rather than stripping out the fans completely for new ones or wiring in the resistor mod.
Cheers and sorry for the hijack!
Similar threads
