View Single Post
Old 07-03-2011, 01:00   #9
Senior Member
FR_MATT's Avatar
Join Date: Jun 2010
Posts: 1,408
FR_MATT has 10 points
I did the other side yesterday it was a breeze in comparison. Got the car on the next height up on the axle stands so that I could twist the wishbone from its normal position (say 3 o clock) to almost 8. Must have come out in about 5 mins! compared to over an hour the week before and we did nother else differently

Rachet strap was a bit more of a pain had to get mole grips onto it to the handle to give more leverage but worked well once I did that.

I used the official assembly stuff mentioned in the guide and then some silicone grease/compound in between the wishbone and the bush.

Probably took around 2 - 2.5 hours compared to 5+ the week before
FR_MATT is offline   Reply With Quote