adjustable

Right I've got adjustable tie bars on the car but it seems the anti roll bar seems to close to the drive shaft where ever it sits. Where should I adjust it to. More it's adjusted the closer the tie bar sits to the drive shaft. At a garae now so need quick reply please people.

hi all i had a garage put in new bulbs on my foglights, but since then they dont seem right, not enough light from the bulbs hits the ground. i was wondering are the foglights height adjustable, if so has the garage over tightened the top bolt???? can anyone advise please cheers bash

6L ibiza is as low as it will go, wich is great, but a pair or tyres every month is start to get a bit costly now, had polly bushes fitted this week, just under it today raising it up slighty so i dont keep killing sumps, the camber of the wheels is rediculous, never mind the toe, so its...

i know theres a few members with the adjustable arb but has anyone got the non adjustable type? good points / bad points

On the mk4 ibiza, is the front camber adjustable because i've looked at it and how the shocker slides into the back of the hub makes me believe that there is no adjustment!! I'm thinkin the lower I go the more negative camber i'm going to get!!!! Cheers for any advice!

On my quest for a smoother less MK2-ish clutch i've come to the cable itself. It seems that the auto adjuster is a load of b**locks as it allows the clutch arm to swing both ways. After a few pushes in the opposite direction the cable adjusts and tightens up again only allowing it to move in the...

what sorta lenth has people set there adjustable drop links at. just trying to figure out if ive got them set up wrong as still catch a tad on driveshafts when cornering.[:@]

Hi Guys, I have a 2008 1.9TDi Stylance and I read on here that through the dealer or VAG.com the weight of the steering could be adjusted. So, I reckon when it's in for it's first service, I may ask them to do this. I had a Focus Zetec and you coud manually adjust this from 'comfort'...

Hi guys Quick question i had the FORGE adjustable BOV fitted to my FR going back about 5 months ago, i would like to adjust the sound now. But i have no idea where it is situated in order to alter the setting, can anyone assist me in locating the adjustable switch. Many Thanks Reesy

Am I right in thinking that if you are fitting coil overs you need to purchase a set of adjustable drop links? in terms of having a performance exhaust, the adjustable drop links allow for things to sit lower so nothing knocks or rubs when you fit the coilies.....just remember reading it some...

Phoned my dealer this morning as I thought I had a fault with my new FR. When adjusting the electric mirrors using the joystick in either the L or R position, I found that when in the L position, only the left mirror moves (as you would expect). But when moving it to the R position, both mirrors...

Where can I get hold of a set of adjustable drop links for the front? As don't want to go down the anti roll bar route 52 plate leon cupra

Is this worth getting guys, am I going to run the risk of detination by winding it up to far?:confused:

whats the point in an adjustable actuator? why do you ajust it.

Anybody know if height adjustment can be retro fitted to a sport?

Is any one using one? I'm going to need one soon and am looking at one of these http://www.eurospecsport.com/fuel.htm Wondered if anyone had any coments on the product

Hi all, I remember the sales brochure showed the 2L TDi sport has aaving Adjustable lumbar support but I realised last night that mine doesn't. Anyone have any idea why it's missing? Cheers.

:lol: Hi All Had my Leon DSG a week great car. Only problem is the passenger seat has no height adjustment. Seat UK cannot supply a new seat & to fit a seat base sounds like a dock yard job. Never been done. So what I need is a friendly Euro dealer who can supply a (LHD)...

I have been working with a guy called Mike from Hughes Engineering, he asked me to help him develop a removable, adjustable rear strut brace for the Leon. Over the last 2 months I have been measuring and test fitting bits for him and now he is about to send me the final product to make sure it...