pipe

  1. Any idea what this is?

    Hi, Was hoping for some help, anyone have any idea what this part is and what it connects to??
  2. Caliper pipe corroded

    I have MK1 Cupra R Brembo calipers. On one the metal pipe is corroded. I need to get a new one of these pipes or get a custom braided hose that would replace the metal pipe. I was looking at getting custom brake lines made but don't know what fittings I need on each side of the braided hoses.
  3. Blowing boost pipe off?! anyone had this problem?

    Hi there, just bought a 55 plate cupra r, remapped up to 270ish brake.. and now and again it blows the pipe off between the long alloy pipe from the turbo and the intercooler, it was blowing it clean underneath the standard jubilee clip, so i go a rather agricultural heavy duty mikalor boost...
  4. boost pipe photos

    does anyone have photos of the hard plastic boost pipe from a pd130 engine and also the dimensions of the openings at each end. thanks
  5. 3" APR down pipe

    Hi just wondering if any one else has fitted a 3" APR down pipe. I got mine fitted 2 days ago and ever since there is a really bad knocking sounds when i put my foot down. The lad who fitted it said that it was very close to my steering rack. If any one else has this problem or has had this...
  6. james walker

    dv to charge pipe and n75 to charge pipe hose

    the above hoses, i want to replace and the dv to charge pipe hose is kinked round since fitting fmic are these just vac lines and can the be replaced with vacuum hose only? reason i ask is because silicone will just kink round too much again, and vac hose will bend better in a longer length...
  7. Tail Pipe Trim

    Has anyone had the tail pipe trim fitted to their Sport? I was wondering if someone has a photo showing what it looks like when fitted. http://seatepac.gedas.co.uk/model.aspx?group=IBIZA&model=IBIZA%20SC%202008%20%3E&category=Sport&subcategory=Exhausts&partno=6J0072000
  8. Cowie

    Charge pipe to DV hose

    Is there a hose available to renew the oe hose between the charge pipe and the DV,have just checked mine and it feels quite soft,is there any pressure through these that would make it not work to its optimum:confused:
  9. Can you mate performance down pipe to a standard exhaust?

    I have totally stock exhaust currently on FL Cupra (single oval exit pipe). I understand that a turbo back exhaust does little for performance so was wondering if you could fit a turbo down pipe to the standard back section? I am looking to go St2+ but if possible, would this be too...
  10. fourtwofive

    charge pipe relocation

    ive got myself a small washer bottle and im looking at getting the charge pipe moved down the drivers side i have forge fmic. my question is does this have to be custom made? i have searched seems everyone has custom ones...
  11. Mattwood

    Help with Boost pipe

    Right, so I went and got my FR TDI remapped by P-Torque last week (which was great) but having travelled 75 miles up the road the pipe that connects to the bottom of the intercooler (the 90° rubber bit) popped off and damaged itself. So, I went up to Ted Johnson - who did a great job of...
  12. Pipe to airbox question

    Ive removed the airbox on my FR tdi. Now, there was a small rubber tube that went into the top half of the box. What is this tube, whats it used for and will it be detrimental to anything just having it hanging there, not attached to anything? Cheers
  13. PD160 charge pipe upgrade for FR TDI

    Has anyone tried to replace standard FR PD130 plastic pipe with the Cupra metal PD160 charge pipe?? (6LL145770B (egr to smic)) Is it a direct replacement?? Or can anyone recommend a direct fit aftermarket upgrade please! Cheers amigos
  14. gtikezz

    breather pipe

    just wondered if anyone knows where to get hold of this breather hose ? thank you :D
  15. james walker

    exhaust centre pipe

    guys, looking at a blueflame rear box replacement as mine has blown, now the price is 170quid for rear box, 300 for cat back, 130 quid is steep for a silenced centre section imo. i know lee69 has done tdi centre section which doesnt have a silencer in and he noticed quicker spool up times...
  16. LC down pipe and decat

    Will this fit my LChttp://cgi.ebay.co.uk/VW-GOLF-4-1-8T-GTI-20V-TURBO-DECAT-DOWNPIPE-DOWN-PIPE_W0QQitemZ120540341899QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item1c10c3a68b If so if i fit it will any lights come on on the dash? Is this a good upgrade? im looking to fit a...
  17. rsmith

    Breather pipe

    Howdy all, My breather system has sprung a leak and while i am waiting for new parts i would like to apply a temporary fix, in the below diagram part number 24( 06A133783)just off the suction pump Y connector is split, i was thinking if i could just use some silicone hose in its place, does...
  18. caztech

    Crankcase breather pipe

    Does anyone know where I could get a crankcase breather pipe for a 2.0 gti cupra sport? thanks
  19. LC exhaust pipe diamater

    Does anyone know the diamiter of the exhaust pipe on a LC from the cat to the centre box? is it the same diamiter from centre box to back box? thanks
  20. warren_cox

    Exhaust tail pipe options on aftermarket exhausts for Leon Cupra/FR

    I appreciate a few of you will have changed your pipework as some will be coming out of warranty, others will have done it as a matter of course as part of your upgrades etc. Question I have is if you could have chosen any exhaust tailpipes (e.g. the bit you can see!) on an after-market...
Adrian Flux insurance services - discount for forum members.