Mk1 Leon Cupra R 225 Garrett GTX2867R Build

LongDave

Active Member
Apr 25, 2011
73
0
Hull
Thanks. You might be waiting a while, the amount of money I've ploughed into it, i fully intend on making the most of it
Capped at 350 for insurance at the moment but made 390 on the rollers.
Should see over 400 with bigger injectors and 430-450 if I went with a tubular manifold and external gate.


Sent from my iPhone using Tapatalk
 

LongDave

Active Member
Apr 25, 2011
73
0
Hull
I've had the dreaded
wet carpets :(
It had water sat on the sills for a while but now it's actually getting in the car.
Door cards off, pretty sure I know where it's coming from.

7dbda65ed079ac71665d5e25ef58900a.jpg

bd36b1b422bacc495e61ee6528d2413c.jpg


Forgot to take photos after completion but there's definitely no water getting through that seal anymore.
Old seal removed and replaced with Silicone sealant half way up the door.



Sent from my iPhone using Tapatalk
 

LongDave

Active Member
Apr 25, 2011
73
0
Hull
Bit of over Xmas tidying done and a new hot side due to seized and sheared bolts to the Downpipe adaptor
ca486b38ffa3197eda4e4c620a7f0899.jpg
61f744a08f7c0ffb66bde0238f713397.jpg
2f2161c2b812ed82fe2047e838f65dd7.jpg
f17f9793bf7d0aab211b28b471acd726.jpg
a5caef647792f67c979ae17deb259d47.jpg
fa37b96b4cafb359012127d0f06892ff.jpg
2e54fdbd260a49e5c0e92ae50d37191c.jpg



Sent from my iPhone using Tapatalk
 

LongDave

Active Member
Apr 25, 2011
73
0
Hull
Just read all your build there and I’ve got to say well done for going through with it after all
Of them problems . Bet the car is a flying machine! Very nice:rolleyes:

Cheers yeah it was a tad traumatic but it’s been worth it, thankfully it’s behaved itself since.
Think I might try and break the 400 barrier this year just to say I’ve done it
 

LongDave

Active Member
Apr 25, 2011
73
0
Hull
What’s the torque like on the car ? I am about 400/430 myself , I don’t think anymore will be needed , the traction is getting s problem Haha



Torque is 380 from memory but for the road i wouldn’t want much more, despite having the diff and about the stickiest road legal tyres you can buy it’s still not possible to put foot down in second without spinning up the tyres


Sent from my iPhone using Tapatalk
 

LongDave

Active Member
Apr 25, 2011
73
0
Hull
What’s the torque like on the car ? I am about 400/430 myself , I don’t think anymore will be needed , the traction is getting s problem Haha



Get yours 4wd converted you can get miles more power down then ;)
I’d get mine done but it’s a right ball ache on the mk1


Sent from my iPhone using Tapatalk
 

RyanC93

Active Member
Dec 19, 2014
313
23
South Shields, Newcastle
I think it is a really big job on the mk2’s aswell, I would really like it but the money it will cost is ridiculous .. did your lsd make much of a difference off the line or help putting the power on in a straight line , or did it just help in the corners etc?
 

LongDave

Active Member
Apr 25, 2011
73
0
Hull
I think it is a really big job on the mk2’s aswell, I would really like it but the money it will cost is ridiculous .. did your lsd make much of a difference off the line or help putting the power on in a straight line , or did it just help in the corners etc?

It’s mainly leaving corners and on the bumpy country roads when you notice it most. The slightest bump in the road would send the wheels spinning in 3rd, it holds on much better now.

Autotechnica in hull have done a few 4wd conversions on the mk2. Probably not cheap but neither is a diff :(
 
Nimbus hosting - Based solely in the UK.