One-touch opening and closing*
One-touch opening and closing means you
do not have to hold down the button.
Buttons ››› Fig. 137 1 , 2 , 3 and 4 have
two positions for opening windows and two
for closing them. This makes it easier to open
and close windows to the desired position.
One-touch closing
– Pull up the window button briefly up to the
second position. The window closes fully.
One-touch opening
– Push down the window button briefly up to
the second position. The window opens
fully.
Restoring one-touch opening and closing
The automatic open and close function will
not work if the battery has been temporarily
disconnected. The function can be restored
as follows:
– Close the window as far as it will go by lifting
and holding the electric window switch.
– Release the switch and then lift it again for
1 second. This will re-enable the automatic
function.
If you push (or pull) a button to the first
stage, the window will open (or close) until
you release the button. If you push or lift the
button briefly to the second stage, the window
will open (one-touch opening) or close
(one-touch closing) automatically. If you operate
the button while the window is opening
or closing, it stops at this position.