drilling

having just come from the world of 20vT, alot of poeple are in the habit of drilling and smoothing their air boxes. Just wondered if there was any point in doing it on a TDI?

I have some condensation in my headlight, i done a search on here and some people reccomend drilling a hole in the back of the light to allow it to breathe. I would prefer to avoid this, but is there any other way of finding a way of preventing it from building up? Thanks.

I want to mount a crossover/equaliser and fuse/distribution blocks to the side walls of my Leon boot. This will require drilling and securing some small self tapping screws in to each side of the boot, in the area just rearwars of the back seats. Is this likely to cause me a problem? Will i...

Took me airbox off today (will a little help from the old man!) And have replaced it with a shitty max power induction kit that i bought off my mate for a fiver! I have been wanting to drill holes in the airbox for ages, have no idea how to go about it and am scared of messing it up...

The bit you drill into to tap off the boost measurements!? Isn't it likely to get swarf in the pipe that oculd go into the turbo? How have you guys made the hole? Drilling at an angle seems a bit pants.

I was thinking about getting the Seat FR parking sensors fitted via a Seat dealer. However looking on the net I have come across Electro Magnetic parking sensors. This type of parking sensor system is mounted behind the bumper so no drilling is required and they are completely invisible. This...

Where is the best place to drill through the firewall when installing gauges? Help is most appreciated?

After reading an earlier post about where to obtain flexi pipe, someone mentioned drilling the airbox. Does this process involve removing filter from inside box then drilling holes in the bottom before replacing the filter and lid and then running some flexi pipe from bottom of box to hole in...

found a couple of ideal holes to route power and ground back from the battery under the windscreen to the passenger footwell, they arent quite big enough for a 4 gauge+ground wire. is it a bad idea to drill them out a bit?

I have been told that you can get a good noise out of the traditional airfilter by drilling the Airbox with holes. Has anyone done this and what doese it sound like? any pictures and coments would be good. and if you have a sound clip of what it sounds like. Cheers!