flywheel

hi, has anyone got a standard vr6 clutch and g60 flywheel while running hybrid turbo approx 280BHP and if so is this setup good enough for this power?

Hi All, So my gearbox bearings have been grinding for a while. For almost 2 years in third but over the past month, it now grinds heavily in 1st through 4th. Nothing in 5th or 6th though. I took it to hospital and they reckon that i need it sorted, (well I worked that bit out myself) so...

Hi all just after some info and feedback on changing the flywheel on my lcr, it's had a stage 2 remap and all the bits done but just want to no who's changed their fly and what you put on. I was looking at a helix clutch kit but have been told it will make the gear box noisy. I would be realy...

I've just been driving about and there is a supercharged sound coming from underneath the car. A strange whirring noise. Also, when I'm in neutral, it clonks and crunches as if I've tried to change gear without engaging the clutch. Feels like it's on its way out what ever it is :( Please help...

OK was ringing around today for prices on clutch/flywheel replacement and asked the guy is GSF if they do a SMF for the car. He advised against it saying it will rip the new clutch to shreds as the DMF has a shock absorbing facilty? Once again I am after the advice of the knowledgeable folk? :)

I have read numerous topics about the clutches on the 1.9 tdi 150 and im really close to buying one and getting it remapped soo im gonna put an uprated clutch in it to hold the power but im really confused; look below and see the two clutch kits, very expensive...

im ready to upgrade my clutch and flywheel for a single mass, been pricing them up and found one at unipart which is a valeo one and is 228mm clutch plate, is this correct and has anyone used the ready to go conversion kits from GT, unipart etc. and if so are these good kits or would it be...

hi there. does anybody know where to get a lightened and balanced flywheel from for my 16v cupra. Been looking around but cant find one any where. Was thinkin bout getting a standard flywheel done but dont want to have my car off the road so was also wondering if anyone had one for sale? thanks

Do you always have to change the dual mass flywheel when changing the clutch? Cars done 49,000 miles. Its a lcr.

Hi, Just back from the garage and £1k lighter after a DMF failure. So I thought I'd share my experience and symptoms with the forum. Now the clutch and DMF have been replaced the leon is driving reallt smoothly, I think I've been living with a dodgy flywheel for a long time. I noticed the...

Pretty sure its done it since new. Setting off especially if doing so just on the clutch there's a judder / dull rattle through te transmision. I was advised when I got paranoid when I 1st got it that its the 'noisy dual mass flywheel' Any one else get this? Im expecting the clutch to...

this kit any good http://www.eurocarparts.com/ecp/c/Seat_Ibiza_1.8_2000/p/Car-Parts/Transmission/Clutch-and-Associated-Parts/Solid-Flywheel-Conversions/?641780170&1&2b8e7429aee33e6b1042019afa4fa76eebafe3f7

Hi all. Had my PD130 remapped by P Torque around 6k miles ago. Over the past few weeks I've noticed that after a long run, I park up take the car out of gear with the clutch up ticking over and I can hear a rythmic knocking/ rattling every 5 seconds. I am fairly sure its the flywheel as...

am just wondering r the mk3 cupra ibiza dual mass flywheel or r they solid? thanks carl

My clutch has just started slipping on my leon , is it worth fitting a lightened flywheel as well as an uprated clutch (sachs i believe) . cheers , neil .

right guys, I have had a bit of a search about but i'm not finding what i need. I have had my car mapped at the weekend and know that the clutch will give up the ghost in the next 8-12 months - So I'm planning ahead. The car is an 04plate 130 TDI sport. I have seen that either Sachs or...

i have just fitted this set up into my o2m 1.8t = is the chatter normally quite loud:-o when you back off the revs while in neutral standing still ?

hi people my clutch is starting to smell now everytime it gets warm, and is not pulling as hard as it did! so think my clutch will be on its way out soon!! so am looking at new clutchs, and was wanting to upgrade as will hopefully be making the car hybrid at the end of the year! i have been...

hey folks recently my duel mass flywheel went on my 01 cupra and i sourced what i thought was the right kit comprising of bearing, cover, clutch plate and flywheel. on arrival i found the flywheel to be solid and not a duel mass. i am having problems sourcing another one without paying dealer...

Hi I have a 2005 Altea 1.9tdi Stylance with 27000 miles, as of this morning there was a strange knocking noise from under the bonnet, which would come and go, took the car to the seat dealer and as I was pulling in the noise really got bad. The fitter diagnosed the problem that the flywheel...