job

  1. Guff wheels with a quick paint job

    the old Guff wheels with a wee lick of paint an laquer! What ya think? Also, Took these in asda coatbrisge after falkirk on thursday nite, incase anyone was wondering!
  2. ben-ducky

    Would this do the job? (HID's)

    http://cgi.ebay.co.uk/Xenon-HID-Conversion-KIT-H1-H3-H7-H9-H11-HB3-HB4-9006_W0QQitemZ330379335700QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4cec249814 Alright lads, just a quick post to see would these do the job? Cheers in advance
  3. uzi_cupra

    My MK4 Ibiza 1.2 '03...turned into facelift...updated pics!!Resprayed, black roof!

    Hi guys this is one of my old cars, had this since around 2007. bought it cheap as interior and exterior were not in best of conditions. i have done much since then to make it what it is today. i will put up pictures of what it has ben through to show you guys the difference! enjoy before...
  4. Coil/spring snapped: upgrade excuse or hefty job to fix?

    Well, i was just setting off at a delicate 10mph(to warm the car up properly) and i hear an almighty twang. stopped instantly to check it out as i thought i had rolled over a metal rod or something had whacked the car on the underside. no clues lying around so i carried on gingerly and heard...
  5. Joe K

    Best Discs and pads for the job ?

    Hi guys , Can anyone tell which are the best disc's and pads for my LCR grooved drilled plan :confused:? Mine were replaced with grooved b4 i bought it and the rear is wrong direction:confused: Cheers Joe
  6. dede

    Lowering... job Not impressed :(

    had my ibiza lowerd today 40mm spring i was expecting it to look a lot lower thank what it does not to happy with it will this drop any more after the springs settle :confused:? thanks will get some pics up
  7. Jordan20vt

    Reduce play in steering (5min job with guide)

    Ok so i stumbled across an old thread, in which people complained about excess play and knocking in the steering. Steering on the mk3 is pretty poor compared to other cars, and my main gripes is the play and general woolyness:blink: On this thread SPUD_G40 said about tightening the connecter...
  8. paint job

    hi. could anyone please tell me roughly how much a full respray for my seat leon cupra would be.
  9. squeak after cambelt job

    At idle theres a "squeak" from engine bay. Sounds like the cambelt is ether too loose or tight. Can only hear it at idle. Does this go away after a while or should I take it back to the dealer?
  10. bozwellox

    Occasional momentary loss of power since replacing lambda sensor

    Could fitting an interior LEDs cause the emissions warning light to come on? Hi all, Just a thought - a couple of weeks back I fitted an LED in the centre interior light (in the middle of the two map lights). I fitted it, tested it and left it at that - without starting the engine. The...
  11. RobT

    Photoshop job for you experts

    I am thinking a white Altea Freetrack, lowered a couple of inches, with a black roof, black 6-spoke 18" compomotive MOs and possibly colour coded bumpers/arches/sills or maybe a red one
  12. rocky2008

    Spray job

    http://img26.imageshack.us/img26/2603/l7490f248bb4b4ba3b689d2xk1.jpg what you think ;-)
  13. Spud_G40

    Spud_G40's BT Mk3 Cupra - FOR SALE

    Hey, Been on the forum a few years now, decided I would put some pictures up of my car, Had a Polo G40 before this hense the name, and bought my car after looking around on here. Here is my wee G40 Heres what My Ibiza looked like when I bought it back in July 06' Spec when...
  14. K3mist

    All over paint job!

    Had to have a little bit of paint work done to my Leon on Sat due to some Yobs going at it with a screwdriver in the festive season :cry: After seeing what a good job the guys did, I asked how much they would charge for a full respray (door shuts etc not included) and they quoted £1150. Now I...
  15. Linkian

    new spray job

    hey everyone, i got a kiwi yellow ibiza and i sorta like it just not all the time so im looking to get it resprayed. i was just wondering what price range im gonna be looking at if anyone knows. cheers ian
  16. lasbazrre

    New job, new car!

    Had too sell the Cupra coz i had no work, luckily i got a new job right a way, so i thought i'd push the boat out! 07 plate Phantom black , but it's just over 6 month old! I got it for a decent price, with a nice spec! The Cupra interior is great , but you can tell where the...
  17. Moley RUFC

    Weekend job

    Managed to pick up some Foliatec Black caliper paint today at Halford. It was in the bargain bin for a tenner so i thought i'd have a go. I also ordered some red SEAT decals from ebay. I'm not going to remove the wheels as i have checked and its quite easy to clean, prepare and paint the...
  18. CupraUK

    Leon Cupra SMIC arch vent (poor persons job!)

    A cheap and cheerful way of venting your IC like an S3/TT (About £3) You'll need: Parts - B&Q 16 Louvre Aluminium Boiler Vent, Rivets, 4mm washers Tools - Stanley knife, drill, pencil, rivet gun Time - About 1 hour 1) Get yourself an large (they do a small and a large) 16 louvre...
  19. AlpineWhite

    Hardest job you've done on a mk2?

    Inspired by clubpolo.... I'd like to know what are the hardest jobs any of you guys have done on the mk2? Interesting to see what people get up to / what goes wrong! For me, 1, drilling the pedal box, because it's so damned fiddly 2, changing the front bearings, brakes, tie rod ends...
  20. __B3NNY__

    Not A Bad Hand Job ;-) (56k Beware)

    Gave the beast its 2nd full detail by hand a month ago, I was travling up to newcastle on friday so gave her a good clean on thursday as i wouldnt have time over the weekend, So heres the results after a wash dry and and a coat of Nattys blue. The R1 is a mates that was also clean a couple of...
SEATCUPRA.NET Forum merchandise