manifold

  1. What Exhaust/Manifold to get?

    first time driver here so i don’t wanna hear to just switch to a cupra, i would if i could but i’m trying to do my 1.616v up as nice as my bank allows, and i’ve heard 4-1 manifold and exhaust is a good shout, as mines is quite quiet atm and is in need of a new exhaust anyway any recommendations...
  2. Gasket between turbo and manifold replacement

    Hi, Was wondering what sort of quote I would be looking at to get this gasket replaced at a garage? Been told it’s a lot easier to do if the car is lifted hence wanting to get a garage to do it. Thanks
  3. 110 TDI manifold options

    stil newbie on the site been doing lots of research and reading. i saw some pics of a 110 tdi inlet manifold and a 130 and 150 tdi and the 130 and 150 look like a much better design for flow. so my question is will a 130 and 150 inlet manifold fit on a non pd 110 ASV engine and would i need the...
  4. D--R--E--W

    long square cover for sitting over the inlet manifold??

    Anyone know of anywhere that sells the long square cover for sitting over the inlet manifold??
  5. manifold .....

    Looking for a manifold and have come across these on EBAY Opinions please?? item ... 120498395357 and item ... 120540573917 would be for a 1.8t leon cupra mark 1 facelift cheers
  6. rideonracing

    turbo to manifold gasket PROBLEM!!

    Hi folks, iv got the 225 leon cupra r and for some reason the gasket between the turbo and outlet manifold keeps blowing! think iv replaced twice already!:wtf: does any1 know wat the problem could b? or is there anything i can put on the gasket to make a sort of better seal? such as silicone or...
  7. seanaldo1987

    turbo bolts loosening & removal of exhaust manifold

    has anyone on here had the typical VAG 1.8t problem with the manifold to turbo bolts loosening and blowing gaskets??? if so what different things have they tried to solve this problem?? also, how easy is it to remove the exhaust manifold as mine is cracked and required removal i've heard a...
  8. 4 branch manifold

    no one seems to list a 4 branch manifold for my 98 cordoba sx, its a 2.0 8v, am i right in thinking its the same as the old golf gti 8v engine, if thats the case then a 4branch for one of thoes would fit but does anyone know if it comes out underneath in line with the cordoba exhaust...
  9. revere

    Adding Stainless into manifold power increase?

    Hi All, The guy I bought my LCR from said that if i put in stainless from exhaust back up into the manifold then I'll get a power increase without having to do the stage 2! Is this true? He said it might get you up to the 300BHP mark but I find this hard to believe ! I imagine it would...
  10. rod the sod

    Inlet manifold and egr removal!

    Hey i am just wondering if it is hard to remove the inlet manifold! i am thinking abouteither polishing it or spraying it black! i am going to clean the egr @ the same time - it is just worth getting a removal kit? do i need to get it mapped in or can i do it thru VAGCOM? cheers
  11. fuzzgeller

    changing exhaust manifold

    hey quick question, my exhaust mani is blowing out somewhere. not sure if it gaskets or mani cracked. mechanic is real busy at min and was wondering is it hard to change or just matter of taking off an putting on again. do i need below the car to do it as well. would try it myself but being a...
  12. wayne lcr

    manifold

    taking it off on sunday to paint and fit a new dipstick any thing to look out for or oat else to replace while its off to save me going back
  13. RichN

    INA Exhaust Manifold - now squeak/leak/stud issue

    ...fitting nightmare "by proxy" anyway. My car's been in local garage for a full day, still not done yet, they're having a mare getting the INA Exhaust Mani' to fit. First, they tell me they've had to file a bit off it to stop it fouling on the head. Second, they've now got it bolted up...
  14. k04-023 hybrid and high flow manifold fuelling ?

    Ive been wondering for some time if us hybrid k04 chaps will need bigger injectors than the bam 225 o.e ones when we fit the new high flow manifold from ina or jbs and though ive asked on the jbs thread they havent answered, so we can only assume no one knows for deffinite yet. Mines currently...
  15. Seat Adam

    N239 or Inlet Manifold Changeover Flap Valve

    Also known as the Anti Shudder Valve. My car is a 2004 Leon Cupra TDI PD150 with 109K miles on the clock. Basically, my shut-off valve is sticking and is stuggling to re-open after engine switch off. I have had a look and can see the vacuum actuator working, just the quarter turn arm, bracket...
  16. Anyone used or seen this manifold before?

    http://www.intengineering.com/Kinetic-18T-T3-Turbo-p8144663-1-2.html whats peoples veiw on this? im currently running a K03 Hybrid, but this looks a good cheap way in manifold terms anyway to got top mounted BT??
  17. CAN YOU HELP???....inlet manifold problems

    am abit stuck guys, had my rocker cover, inlet manifold and charge pipe powder coated the other day, fitted them all back on today, am about 95% sure ive not made any mistakes and yet on idle its running like a bag of nails.....when i rev it its better but when at idle its coughing and...
  18. james walker

    symptoms of split intake manifold gasket

    im pretty sure ive an air leak coming from the inlet manifold area, im experiencing high fuel comsumption, and poor air to fuel ratios... what would be the symptoms of a split intake manifold gasket guys, im hoping the issues im seeing are down to this as i have a phenolic gasket to fit...
  19. Manifold Glowing RED!!!

    Hi, went to Midland VW yesterday had my car on the dyno produced 250bhp, but it drops after a few runs, the technitian says that the turbo i have fitted which is a GT2560R but my manifold is a standard one, which causes massive heat soke after a few runs, and to confirm i tuk it fo a few...
  20. ABD Racing Intake Manifold

    Has anyone tried this on there 1.8T I have just purchased an Audi R8 oil cap as had an oil change and mine is completely shagged but came across this:D..... http://www.awesome-gti.co.uk/product.php?xProd=13775&xSec=349&jssCart=642ff641204dbe7e08ad36b6e00070db
Nimbus hosting - Based solely in the UK.