nuts

  1. I have lost my nuts....

    I appear to have lost the nuts that hold this pipe together from behind the manifold which has damaged the gasket so I have taken it all out again ordered another gasket but i don't know what nuts to buy so it doesn't happen again, can anyone help? Thanks
  2. Locking wheel nuts

    Hi All Do locking wheel nuts come as a standard item on a new build? I can find nothing in the Exeo brochure to confirm this. Cheers
  3. Wheel Nuts

    Need some new wheel nuts for the Cupra... What size are they? Where's the best place to get them from? Also need them 20mm longer for the rear. And also locking nuts all round
  4. what nuts / washers

    Hi, Can somebody please tell me what nuts and washers I need to get for the heat shield on the exhaust manifold? I need to fit it but have no bolts
  5. TJenkos

    Downpipe nuts

    Turbo to downpipe nuts.. Removed the backbox and mid section, now at the front... What tools do I require to get to the nuts properly? Should I be undoing them from the top or the bottom? Believe I need a universal joint and some stubby spanners.. Is there anything else I could do...
  6. help im going nuts with my KEY

    can anyone help my key is playing up one day it will unlock no bother from the c/l button then it wont work the next ive tried new batteries in the key.i hate the thought of paying £150 for a key :wtf: back brake light flickers to when im sitting idle with her ticking over. this only happens at...
  7. FRESHMODE

    Riv nuts or M10 bolts?

    Hi all, Have pickup my Upper and Lower strut brace from Audi. The only fitments I have been given with the two braces are 8 'Riv nut' type things I know a few of you have fitted the upper brace with M10 or M12 bolts, has anybody had one fitted with Riv nuts!? if so any difference? I've...
  8. SeatR

    how many nm to use on the turbo to downpipe bolts when tighten ?

    new question: how many newtonmeter to use when fastening the downpipe to the turbo ? im about to change my downpipe with a 3" 42 Draft Designs downpipe with magnaflow sportcat and have some quick questions should the nuts and washers on the turboflange be replaced?
  9. Mk4 Locking nuts

    Just got my OZ Superturismo GTs 17" for my ibiza mk4 08. After searching on ebay and other online shops for locking nuts I've seen M12 x 1.5, M14 x 1.5 and M12 x 2.0 all advertised as correct for ibiza 02 and onwards? :confused: I'm confused as to a which size is correct... Considering I've...
  10. stuck wheel nuts

    Wanted to paint the discs to hide the corrosion today. Unfortunately all the wheel bolts on the passenger side are seized and the locking nut on the front is seized. Sprayed them with WD-40 type stuff and no joy... My impact wrench couldn't even undo them :confused: Anyway, I managed to...
  11. Nuts! Part numbers please

    Does anyone know the part numbers for the following please: Bolts that go into the Throttle body Coil Pack bolts bolts for rocker cover just need to see if I can get one of each from Seat or there abouts, and they are then being sent off to www.tastynuts.com to get some sets made up in a...
  12. Driving me nuts! seatbelt rattle

    Can anyone help? I have the most annoying rattle/squeaking noise coming from the passenger side seat belt/b pillar. It squeaks like mad when you go over bumps etc in the road, i've tried moving the seatbelt mech up and down without success. Has anyone had the same problem and what was the...
  13. Does the Toledo 1.9 Tdi se have locking wheel nuts?

    Hi there, First post and all that. Does the Toledo 1.9 Tdi SE 2001 Y reg have locking wheel nuts? Thanks
  14. Big_Lad

    Locking Nuts

    Ok i have abit of a small problem, i seemed to have lost somewhere (in the last two weeks)my locking nut key for my alloys. Anyone have any suggestions on how to get them off now? Also can anyone recommend some shiney new ones along with some shiney bolts too as my current ones look naff...
  15. MomoMK2

    extended locking nuts?

    hiya ive used search on this and not really found anything, also googled it and ebay'd it and not really found anything there either. basically im buying some delta mics 15mil spacers thats come with extended nuts (product no. 7949 see...
  16. Copper Cupra

    Wheel Nuts.

    Just a quick question... I'm currently running 20vt alloys, which have the original wheel bolts on, which I'm guessing are same as found on steel wheels. This I'm not bothered by, as they are hidden behind the centre caps. I've now got myself a nice new set of Cupra-R alloys which I'm going to...
  17. lard44

    'official' locking wheel nuts?

    When my g/f picked up her new mx-5 she had a helluva time finding the adaptor for the locking wheel nuts, so I went out and had a look for mine...only to find that I haven't got any!:cry: Need to remedy this quickly - do SEAT do any 'official' ones? I only ask because on my old Fiat (okay...
  18. TheSultanofPing

    Locking wheel nuts for LC

    I have a bit of a problem :doh: I've just had a look at the wheels on my Cupra as I was going to get two new front tyres this week and I seem to have locking wheel nuts. That would be fantastic but I didn't get a key for them when I bought the car :doh:. What I need to know is does the...
  19. Gordz

    Nuts??!!??

    I've just bought some Bk Racing Eclipse 17" wheels, and stupidly i never thought about needing to buy longer and/or thinner wheel nuts, because obviously the one's used for the seat wheels wont fit. Where's the best place to buy them and does anyone know what sort of sized nut i'm looking for...
  20. Locking nuts...

    Can anyone recommend some good quality locking bolts for the Leon MK2, as I'm not sure about sizes etc. Also in silver as well if possible. :) *EDIT* Ok new question (didn't want to start a new thread). Is it ok to use the radius shape locking bolts that come with the Leon on after market...
Chris Knott Insurance - Competitive quotes for forum members