pot

  1. discs and pads needed for porsche 6 pot brakes

    hi, im having problems finding discs and pads to fit my porsche 6 pot brakes on my mk2 leon cupra, i was quoted £800 for the ecs stage 5 discs and pads replacements. (thought this was a bit pricey lol) Does anyone know if any other vehicles brakes fit, ie RS4 or any of the porsche range? or can...
  2. bla1n3

    pot hole / suspension? *** JUST HAD A GOOD LOOK UNDER THE CAR ***

    Just before Christmas many pot holes started appearing where i live with the bad weather.. now im noticing like a squeaky / creaky suspension .. not sure wether its coming from the back or the front of the car. squeaks a bit when its just me in the car but more noticeably when there's 2 or...
  3. Advise following pot hole damage

    Am I being paranoid..... Beginning of December, I had a small accident with a pothole, damaged a front tyre, and a rear wheel.... but having had the tyre replaced, and the car checked out, all seemed OK.... Last week, Wednesday, I took the old dear shopping, as we go out of the village...
  4. 4x100 4 pot brembo set up?

    Hi all i'm hailing in from edition38 after I was recommended to ask on your forums, since i'm a VW lad! I'm currently putting a Vento together over the winter for show/daily use once it's finished, I want to keep 4x100 (since i've got some BBS LMs in that fitment) and run an OEM setup, so I was...
  5. 4 Pot Brake caliper painting

    Hi, Is it ok to paint my ap racing calipers with hammerite paint? they look like they have plastic type coating (as standard) and just want to confirm that the paint will work on these? and also, has anyone got any or know if anyone sells SEAT SPORT white decals for the calipers so i can...
  6. jcp

    AP 4 pot Brakes

    Just gauging interest - I may be able to get a set of AP 4 pot calipers and rotors/disks/ pads: fitted and working for £850 to suit a Leon Fr. They are cast with the TVR initials -for which they were intended. This strikes me as good value and the chap supplying them has more- does this sound a...
  7. CupraDaft

    Tyre Bulge & Pot Holes

    Came back from holiday the other day late at night and then headed to work the next morning quite early. A couple of minutes from home and I hit this massive pot hole that had developed since I had been away. I saw it too late. It was on quite a narrow bit of road and a lorry was coming in the...
  8. Around 2k RPM, MPG to pot?

    My Sport TDi 130, when cruising around the 2k rpm make, I can't seem to make anything into the 50's on the MPG? For example, cruise control, 75-80MPH = 47MPG at the very most? 1.9 - 2.1k rpm 45 MPH in 4th, again, in the late 40's? just under 2k? Measured my expected MAF and actual MAF...
  9. SEAT LEON 4 POT BREMBO CALIPERS on mk3 ibiza

    will Seat leon Brembo fit on mk3 ibiza I know there 5 stud but will the standard disc fit cheers
  10. joshpmc

    Wilwood 4 pot calipers???

    Has anybody fitted the wilwood 4 pot calipers to their cupra?? They are reasonabley cheap and i was ondering if they are anygood???
  11. JAY DE

    Brembo 4 pot question

    Does anyone know the size of the pistons in 4 pot brembos.. just ordering some Dust Boot & Pressure Seal Kit.. J :)
  12. Cupra 4 pot brakes

    Just a q for the cupra owners. How do you find the brakes. Do you agree with me that you have to pressed the pedal quite hard. Sometimes it feels like i am not goin to stop then i go into a slight skid??? Also How do I reset the ecu as I have just fitted the green filter and heard a reset of...
  13. devonmikeyboy

    My new 8 pot 365mm brakes.

    Now that my car is running 300ish bhp ( well when i get the turbo manifold gasket fixed anyway :whistle: ) i thought i better up rate my brakes. After much searching i finally bought a set of Audi RS4 8 pot callipers and 365mm discs which arrived today. You really have to see these monsters...
  14. devonmikeyboy

    Tarox 10 pot calipers and 330mm discs or Hi spec 6 pot calipers and 360mm discs.

    My Audi is off having the first stage of some engine work done at the moment to boost the power a bit. The standard brake setup will not be strong enough and so will up grading. I have been looking around and basically its come down to a Hi Spec 6 pot 360mm or Tarox 10 pot 330mm conversion and...
  15. devonmikeyboy

    RS6 8 pot calipers onto an Audi A3 2.0 TDI quattro ?

    Found these on flea bay.RS6 8 piston calipers.Would they fit directly or at least be an easy brake caliper upgrade for a new Audi A3 2.0 TDI quattro ? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8030221463&fromMakeTrack=true
  16. andy_dea

    ap racing 4 pot brake kits

    has anyone looked into or got the ibiza ap racing 4 pot kit with calipers and disks pads and hoses ect, in an alternative to the brembo upgrade, i know brembo have gone up, but will still be the cheap alternative but the ap calipers my give better clearance on hub to spoke , so can run more...
  17. AndyHazza

    Tarox 6 pot brake upgrades - guaging interest!

    Group Buy: Tarox 6 pot brake upgrades - guaging interest! Wanting to see if anyone would be interested in the Tarox 6 pot caliper upgrades. They come with: 6 pot billet calipers carriers hoses fast road pads and 280mm discs. The normal retail on these is £635+VAT, if we get enough...
Progressive Parts, performance parts and tuning specialists