-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
Nice work, wheels are tidy. you could still get coilovers mate, but just not take them all the way down.
The middle 'S' badge should go black or same colour as wheels to stand out more and the mirrors too
*shameless plug* there's a new VAG site, see my sig, just got up and running, if you're from london then join up
*shameless plug over*the front end looks realy nice, quite aggressive too
Thanks for the replies,
The badge was really easy to do. I'd had the idea of doing it for ages, but only got round to it whilst changing the bumper.
All i did was remove the centre grille from the bumper and pop out the 's' badge. The actual bits i painted red are attached to the grille and not to the chrome badge. The only red paint i had hanging around was the paint that i used to do my brake callipers, Might not be the most suitable paint but it did the job. 2 coats with a touch up brush and it was done.
The badge was really easy to do. I'd had the idea of doing it for ages, but only got round to it whilst changing the bumper.
All i did was remove the centre grille from the bumper and pop out the 's' badge. The actual bits i painted red are attached to the grille and not to the chrome badge. The only red paint i had hanging around was the paint that i used to do my brake callipers, Might not be the most suitable paint but it did the job. 2 coats with a touch up brush and it was done.
Nice job of the splitter! Defiantely get it lower though, you can drive around problems with clearance. Im after some centre caps to, were they seat ones or home made?
I was looking for a while for the centre caps. They are origional Seat parts but i got them of ebay for 4 quid brand new!
I think you can probably get them from a dealer as they look the same as the Cupra alloy centre caps. They are 55mm.
ph2858 - the splitter and front bumper is all thanks to Guiness, as i bought it off him after he wrote off his car.
I think you can probably get them from a dealer as they look the same as the Cupra alloy centre caps. They are 55mm.
ph2858 - the splitter and front bumper is all thanks to Guiness, as i bought it off him after he wrote off his car.
Yeh if that was me I would lower it, drive or no drive!! Looks good! What tools did you use to paint your alloys? They look really good!
Definatly an improvement! Keep her going in the right direction!!![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
And to all looking for centre caps: I have seen alot of them going on eBay..! It is the way forward I'm tellin ya!
Definatly an improvement! Keep her going in the right direction!!
And to all looking for centre caps: I have seen alot of them going on eBay..! It is the way forward I'm tellin ya!
Cheers Josh, I'll definitly be getting it lowered in the new year, sod the drive!!
I'll put up a thread of how i did my wheels soon. The only power tool i used was a drill and flap wheel to grind down the old paint. Most of it was hard work using my hands and plenty of sandpaper!
I used aerosol cans to spray the wheels.
I'll put up a thread of how i did my wheels soon. The only power tool i used was a drill and flap wheel to grind down the old paint. Most of it was hard work using my hands and plenty of sandpaper!
I used aerosol cans to spray the wheels.
Cheers Josh, I'll definitly be getting it lowered in the new year, sod the drive!!
I'll put up a thread of how i did my wheels soon. The only power tool i used was a drill and flap wheel to grind down the old paint. Most of it was hard work using my hands and plenty of sandpaper!
I used aerosol cans to spray the wheels.
Looks so good I thought it must have been a spray gun at least! How the f**k did you manage that!? Fancy doing mine??
Be interesting to see how they hold out to the elements.
It was actually quite easy. Wheels and other small parts are the only times i'd use aerosols as they're crap for doing pannels and stuff.
Not really the best time of year to put new wheels on, but i suppose it'll be a good test. I sprayed on a few coats of laquer so they should be ok.
Not really the best time of year to put new wheels on, but i suppose it'll be a good test. I sprayed on a few coats of laquer so they should be ok.
Deleted member 13581
Guest
Altech - do you have the receipt for your centre caps still? I need the part number so I can get some for my Tavvy wheels too. Cheers!
Cheers! Ibiza 130 - i bought them off ebay so didn't get a invoice. I would pop one off and give you the number, but i don't want to risk chipping the paint!
I'm sure if you go into Seat and ask for the ibiza cupra centre caps (which i think are what i have?) they'll know what you mean. Just make sure they're 55mm. Or you could get lucky and get a bargain of ebay like me
I'm sure if you go into Seat and ask for the ibiza cupra centre caps (which i think are what i have?) they'll know what you mean. Just make sure they're 55mm. Or you could get lucky and get a bargain of ebay like me
Similar threads
