Hi everyone,
Got a PD150, Was driving to work on the motorway doing a steady speed, when the boost just stopped and the car lurched a bit and had no power, still drove.
Switched car off and back on and was fine.
Now used my OBD2 reader and its giving P0299 fault, so replaced the N75 valve with a new one from darkside and there's no boost at all now.
Is this more likely my turbo gone? It's a falcon turbos hybrid GT1756VK that's from about 2020 I think (previous owner)
In the middle of it working and not working it would smoke way more on boost than it usually did.
I've just fitted a darkside TIP and got some new vac lines to fit from the actuator to the N75 to see if it's been a split in the hose but im not very hopeful.
Anyone had anything like this before?
Thanks
Crackers
Got a PD150, Was driving to work on the motorway doing a steady speed, when the boost just stopped and the car lurched a bit and had no power, still drove.
Switched car off and back on and was fine.
Now used my OBD2 reader and its giving P0299 fault, so replaced the N75 valve with a new one from darkside and there's no boost at all now.
Is this more likely my turbo gone? It's a falcon turbos hybrid GT1756VK that's from about 2020 I think (previous owner)
In the middle of it working and not working it would smoke way more on boost than it usually did.
I've just fitted a darkside TIP and got some new vac lines to fit from the actuator to the N75 to see if it's been a split in the hose but im not very hopeful.
Anyone had anything like this before?
Thanks
Crackers