Guinness's Silver Mk4 Ibiza

Well know a lot of you have been asking for me to take pics so I have taken quite a few (sorry about the sizes was taken off my camera phone) not the greatest scenery but never been one to travel to just take pics of the car.

Current Spec :

Engine
PD160 Intake (smoothed out)
Green Cotton Panel Filter
Custom Code Stage 1 Remap
Sprayed Engine Covers & Battery Cover

Suspension and Chasis
17'' Kei Force 10 Alloy Wheels.
Toyo T1R Tyres
VRS Front Anti-Roll Bar
Polyflex and Cupra Bushes Fitted
Raceland Coilovers
20mm Rear Spacers
Whiteline Rear ARB
Grooved Front Discs

Exterior
Facelift Front Bumper with Sport Grills (sprayed lower middle in black)
8K HIDs with LED side lights
Cupra Rear bumper
LCR Splitter
Sprayed Rub Strips
Sprayed Black Front Seat Badge
Aero Front Wipers
Aero Rear Wiper
Delocked Door & Relocated Fuse
FR Rear Lights
Light Tinted Rear Windows

Interior
Flip key
Cupra Handbrake
Full Seat Sport (Seat Accesories upgrade) Interior
Chrome Vent Rings
Cupra Vent Switches
TT Pedals
W8 Interior Light
Custom Made Dead Pedal
Sony Head Unit
Parrot Hands Free Kit
Full black interior including headlining & Pillars















Thanks for looking

Upgrades Hopefully on the Way:
Larger Wash Bottle
KVW Auto Window Tool


Repair Bits:
New Windscreen to replace my chipped one
Bonet Sprayed to remove chips
Vent Surround Fixed
New Car Drivers Car Matt
Wing Mirror Covers seated Properly
Nocking from Rear wing found
Wheel Refurb
Car Polished & Waxed
Bottom of Bumper Sprayed & Badge Touched up.
Interior Cleaned
New Rear Discs & Calipers Touched up
Windscreen Washer Pipe Replaced

it sure does adlav really want a set of FR lights if anyone has any .

you sure will damoegan.

As for delocking all you need is a new barrel inners (one without a lock bit), barrel cover, and blanking plate. Looks mint and is much safer. O but will need to relocate the fuse which isnt hard really.

give me first refusal then matey

and no all you do is undo the torx bolt (not too much), pull out the barrel, put metal cap over the part that the lock barrel connects to, put new solid metal barrel in, and put new painted cover on. Cost me about £15 incl locating fuse. I was getting paint done at the time so didnt cost me for that.

New pic of the bumper that went on today.

yep thats coming in 2 weeks matey.