logs

After recent problems with my car, i decided to bypass the N249 valve today to see if things would improve. Here are some logs i did tonight with settings set at B8T7 on the sps3. As some of you will know im running a k03s and stage 2 Revo with all the goodies.... Any...

dan asked me to look at them but with his being a tdi and mine a petrol its alot different to mine, was just wanting peoples input as to how things look and if possible what things are! cheers gaz! Group A: '002 Engine speed Throttle pos Operating Cond/AC Coolant Temp TIME rpm...

Hey Peeps, For those that are interested....logs of my Laguna FMIC and the standard SMIC **PLEASE DO NOT MAKE THIS A LAGUNA Vs THREAD...OR A LAGUNA'S LOOK PANTS THREAD.... I WOULD ASK THE MODS TO ENSURE THIS....** I have done this as an informative thread only.... Mods K03S...

Been out for a little logging. It seemed to be going well given the the temps of ~33c. Things were fairly busy so I didn't get that many full 2-6.5k runs. One thing I did notice was that as when I started accelerating after lifting off for traffic the boost didn't seem as it should for a...

I run my car all the time on BP Ultimate as there isnt a shell garage near me and ive heard some people prefer Ultimate to Optimax anyway. I recently brought 10 bottles of Millers Octane Booster (2 ron) I did some logs before and after adding the octane booster to a full tank of BP...

I have a standard Airbox and a modded airbox, for a while I've been wanting to do a back to back test and yesterday I had to pop the standard airbox in. The standard airbox is, err, standard. The paper filter in it should be fairly new - the standard box goes on when the car is serviced and...

http://jonzy.zesthost.com/vagcom/LOG-01-003-118-114-LB9T7.CSV http://jonzy.zesthost.com/vagcom/LOG-01-020-118-114-LB9T7.CSV http://jonzy.zesthost.com/vagcom/LOG-01-115-113-114-LB9T7.CSV Anyone see where the problem is? Any suggestions :)

Recently started "playing" with vagcom and have found the odd fault code. I had an intermittent misfire(can't remember the code) which I deleted a week ago and hasn't returned but now I've got this one:- 16396 - Bank 1: Camshaft A (Intake): Advance Setpoint not Reached (Over-Retarded)...

Just been out on the A5 doing some logging, comments welcome on the plots. These are for fault finding in the hope I can discover whats causing my low MPG at the moment. The car is a Jabba remapped Octavia 1.8T which has the K03S turbo

I'd love to post the actual logs taken from block 005 in the same format as others I've seen on here ie complete with scroll bars to scroll up and down the logs. If anybody can help me with that then I'll update with the actual logs. Anyway, out of 5 runs I got 8.15s, 7.24s, 7.86s, 8.16s...

Put my new replacement Green filter in today (old ones not looking too healthy from having things piled ontop of it in the shed after being removed for the 40k service). Thought I'd log the MAF airflow differences with VAG-COM. Paper filter is a standard SEAT paper filter, 4000 miles old, was...

Hi Done some logging of friends car tonight, he is running a FMIC and revo stage 1, could someone do a graph to see if it seems if its running right compared to others if possible. Thanks Marc http://www.marcdowie.com/steven.csv

Revo Stage 2 Logs - Down on power?? I would be really grateful for any/all comments on the following logs ...... Tuesday 7 February 2006 21:10:56 06A 906 032 HN 1.8L R4/5VT 0002 Group A: '003 Group B: '020 Idle speed Air mass in Throt Angle Ignit Angle Idle...

Advice - Logs attached - Updated results! Did 2 tonight logging 003,020 & 115 - running esso 97sul .. heres the results 1st one is a 3rd gear run Clicky 2nd is a 4th gear run Clicky Advice welcomed, I know the MAF is reading low but im concerned about the CF stablisation being...

Hi guys, MAF seems to be playing up at the moment by making the car jittery on idle, and poor starting with overfueling, so have done the following log. Its interesting to see its max was 144 on the mass flow (003) Its got stage 1 revo, surely it should be on at least 160 upwards? all...

We ran a before and after (olly and I) on his REVO'd mk3 ibiza cupra. Friday evening on std SMIC and tonight on Forge FMIC data on raw spreadsheets here>> SMIC from Friday logs http://badger-5.com/bin/intercooler/LOG-01-115-011-020ibiza-olly1.xls...