made

  1. Willie

    Whats the dash board made of?

    I'm going to be looking at getting as much weight as possible removed from my car LCR. One of the next big hurdles is to rip the dash board apart and save as much weight and have as little extras as possible in there. There are the obvious ones like the radio, passengers air bag, fire...
  2. SalSheikh

    Home Made Centre Vent Gauge Trim

    guys, started a new thread as i moved some pics in my photobucket account and lost the links :blink: started with this: then removed the rollers after some advice today a bit more work done... i removed my centre vents and firstly found this: so i cut it out with my...
  3. rich146

    New Tailor Made Rear Sun Blind For 2009> Leon

    Has anyone got one of these? It looks more 'fitting' than the usual (cheaper!?) rear sun blind for the Leon pre 2009. More expensive too!? Considering having this fitted to my new Leon im picking up next week.. Its on the seat accessories site http://newnique.tripod.com/sunblind.jpg...
  4. Bought myself a brand new Ibiza SC CR 1.6 TDi! Hope I've made the right choice!

    Evening all, Bought myself the above car on the 4th of October. Been browsing the forums for a week or so now, so thought I'd finally join and say hello. I'm moving on from a 1.5L Yaris T-Sport. I was tempted to say 'upgrading' from, but that TS is a frickin' awesome car and I'll be incredibly...
  5. Moffat

    Those "big mouth" cupra R bumper's

    I'm sure i've seen one or two on here, where the number plate has been moved, either relocated or made into a sticker, and they have the whole mouth of the bumper open. i took my plate off to have a look behind it, but found that there was the big lump of extra bumper behind the plate. How can...
  6. loonymoon

    Nearly made a terrible mistake...

    .. and changed my SEAT ibiza for a Citroen C1..... I've been thinking for a while that my 1.4 SX just doesn't give very good performance for a car that is also really not that economical (33mpg) or particularly cheap to tax. I don't do that many miles a year (6000) and wouldn't mind if it's...
  7. Mashburn

    I've bought an LCR !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Picked this 210 LCR up earlier today! And my first impressions of the car are......well put it this way, i drove all the way home with a grin on my face!:D Very pleased with it and got it for a decent price so i can spend a few £££ tidying up the front end (stonechips). And then sorting the...
  8. Sportrider

    how many were made for the uk?

    hi all i have done a search on here and the world wide web and found nothing i was just wondering if anyone knows howmany cupra tdi's were made? cheers :)
  9. Has anyone made a boost leak detector for leons?

    I have tried having a search and wondered if anyone has made boost leak detectors for the leon?
  10. My new home made grille

    I know it's a bit rough but I like it. It's a cut down R32 grille inserted into the original grille.
  11. seantdi

    leon double din dash (home made)

    hey guys just a few pics of my home made double din install. i bought a double din facia and made up the center consol out of a scrap cars console! saved a few quid on the price of the console from seat but there was a bit of work involved!! you can see here that i have fitted...
  12. How can i made Single wiper?

    Hi mates How can i made single wiper? Can I made custom?
  13. Heavy

    What is my car made of?

    Little girls are made of sugar and spice. Little boy are made of slugs and snails. But what is an 8v GTI Cupra Sport made of? I have a rough picture. Golf GTI Mk3 engine AGG, Polo Mk?? floorpan?, Golf GTI Mk2 & 3 suspension front & rear mix? Can you clarify this? I am just...
  14. skunnie26

    Breather Pipes Made of Chocolate. What is a Good Replacement For This

    I have suffered from petrol fumes coming in through the vents with the problem being traced to a perished/split breather pipe under the bonnet. I just recently replaced the hose shown below and have only done about a thousand mile or so before the problem reoccurred. Does anyone know of a...
  15. st10587 (girl friends) Seat Arosa 1.4 tdi s - Whiteline Rear Anti Roll Bar Fitted!!!

    We brought today a little arosa!! thought id share it with you guys. its a 1.4 tdi 51 plate with just over 42k on the clock. it has a few bits of paint working tyding up but other then that seem is really good condition. here are some piccys of how it stand atm.
  16. CupraLee K1

    How Many K1's Made?

    Just wondering how many were made? Had a limited edition Scooby with only 1000 made with plaque etc. Shame they didnt do the same kinda thing with the K1. As it seems any1 can now go buy a kit and stick a K1 badge on boot and no1 is non the wiser? :(
  17. ding-dong

    Decision made!

    Bought a 56 plate ibiza FR 130 today in emoticon red :p I go to pick it up on Sunday, cant wait. What little things do you recommend i should do with it? Took out extra 2 year warranty so wont be doing things like lowering or remapping just yet. Wouldnt mind changing the mirror covers to red...
  18. scarface

    Made a blunder...

    Went to london on sunday to pick up my dad from heathrow airport. Did the usual checks, oil, water, tires, put petrol in and off i went. Got to london in good time, but then got stuck in bumper to bumper traffic near the airport when i noticed steam coming from the bonnet, temperature was on...
  19. str8ballin

    gt3071r @1.7 bar made 400bhp

    Hi all.. took my car to western performance to a rolling road day for redline magazine, they have a dyno dynamics rr so thought id see how it goes... Here are the graphs for bhp at fly, wheels, A/F ratio and boost.... I made 400bhp which i was dissapointed about but I thought it...
  20. Kai_1600

    Well, she made the 100,000 miles

    100,000 miles ticked over on the way to work this morning :D 38,000 miles of happy motoring for me in the 3 years i've owned her for the cost of a 1 x back box and 1 x new clutch. Time for a good service, cam belt and all that as a christmas present!
SEATCUPRA.NET Forum merchandise