So its been a while.....
Cant really remember where I got to, I failed to get the car running right to where I thought it was at a suitable place to take it to the ring, especially as I would be driving it there...
So i bought a trailer....now it can get full on death all day!!
So ive taken some time out and with the
help of lockdown and no travk days to really address the car.
Earlier in the year I got
KW Clubsport suspension fitted
Sold engine mounts fitted
Full abs delete with tilton brake bias, all lines run inside car now...no abs means its now a man's car
Bought some.loghter weight rotas too, the grey ones, they're jap style but hey let's be different. Silver rotas are 17s with uniroyals on for wet.
I did cadwell in Feb and donnington park in March.
Car was absolutely fantastic....but theres always more to do.
So ive decided to basically strip back, clean, rebuild and light weight as I go.
So ive stripped every wire out the loom thats not needed, right back to fuse box, saved a fair bit of weight!!
Ive also lopped any disused brackets studs etc off I can.
I stripped front bumper off to mount the coolers properly as they were mounted by stevie wonder. Surprised they didn't fall off. At the same time ive lightweighted the slam panel, deleted the headlight mounts and made some from the slam panel and also the wing mounts.
Got to take some more plastic out the front bumper too.
And ive fully stripped out underneath, had a full de grease and clean and im spraying it underneath with upol raptor bed liner, car is actually really solid, minimal rust and its superficial thankfully
Everything getting cleaned and painted as it goes up,
Crappy oil leak as it turns out was head gasket, so thats been done now, found the turbo gasket was also blowing so hopefully will make a few more ponies on the dyno.
Now.....ive also ordered carbon fibre bonnet and tailgate due in first week of july
And....a full tubular front subframe and bottom arms, was limited to the amount of castor and camber I could achieve on the standard set up...that wouldn't do.
Save 6kg on the subframe and csrbon is supposed to be 50% of the steel panels.
Anyways lots of pics here, deadline is 20th july to be fully built and set up as I WILL make nurburgring and zandvoort at the start of August.
Any questions feel free to ask sure ive missed stuff....and yes I should be able to quote a weight when its done
Sent from my SM-G988B using Tapatalk