New Washers For Winter
With winter comming up I decided that I wanted to fit some heated washer jets to my car, I also decided that I missed the fan type spray pattern that my golf had.
After many hours of trawling the net and the scrapyards, I found that ford do some fan type spray heated washer jets and decided to purchase two of them.
The physical size of them is perfect as it fits nicely in the littlle valley in the scuttle, however they do not clip into place, so I will need to fix them in somehow.
The Leon jets have the water inlet at a 90 degree angle to the direction of spray on the horizontal and about 45 degrees to the base in the vertical, however the ford ones have the inlet at 90 degrees in the vertical in the centre. This will mean some adaptation of current washer tubing also.
The spray pattern seems sufficient, but they were only slaved in place and I need to try again once fitted correctly.
Hopefully it does not rain tomorrow, so I can remove the scuttle and get them fitted and wired in.
New washer jet in packet with p/n
Out of packet
Std Leon washer Jet
Ford Washer Jet