Aura removal

[TallFella]

I know there has been many a thread about this, but I've searched and searched for the answer to no avail.

I've tried the credit card thing, no joy, just two bent bits of card.

I've just been sent these "keys" which look like lollipops. No joy. The guy sent me the "vertical" ones, when in fact I need the "horizontal" ones.

I know people have referred to "wiggling" the card/key/other implement about - but is there some wort of diagram? I've wiggled and wiggled but I don't want to break anything. Is there a chance that I could bend the clips inside?

 

[Wermy]

the keys should have little hooks on the end, and should lock into the radio to enable you to pull it out! i belive you need to have the hooks facing the driver side both facing the same way from memory.

 

[TallFella]

the keys should have little hooks on the end, and should lock into the radio to enable you to pull it out! i belive you need to have the hooks facing the driver side both facing the same way from memory.

These are the keys I have:

http://www.siocommunications.co.uk/Shopping/view_product.php?product=PC5-133

Don't think they're right

Not the ones at the top, the ones that say for Gamma/Beta removal.

 

[Wermy]

http://www.siocommunications.co.uk/Shopping/view_product.php?product=PC5-93

these are hte ones i used, or very simerla,

 

[TallFella]

http://www.siocommunications.co.uk/Shopping/view_product.php?product=PC5-93

these are hte ones i used, or very simerla,

Just worried I've damaged the clips somehow by using the wrong keys.

 

[Wermy]

Just worried I've damaged the clips somehow by using the wrong keys.

the springs look quite robust!

Put the keys in and pull them apart away from each other, then pull towards you, or you can put your finger inside the cassete and use one key at a time!

 

[TallFella]

So the springs are on the side?

 

[Wermy]

So the springs are on the side?

yeah the bottom one, needs to be push in about 5mm

 

[TallFella]

My clips don't look like that any more...

They look bent. Oops.