Guys, hope someone can help with this one. I have a 2017 Leon ST FR Technology, I ordered one of the headlight switches with the dash sensor from ebay. It was the model for the Mk7 Golf, as I had read that this was the correct one to go for. When I plug it up I can get auto lights working fine, tunnel mode working fine but no Coming home/Leaving home function. The Front and rear fogs don't work either.
The switch I bought is marked with code 5GG941431D. (10 pins) This also came with a 4 inch extension wiring.
The one it replaces in my car is 5GO941431AH. (8 pins)
Does anyone have any pinout diagrams for these switches to see if its possible to change the extension wires to see if this will work with my Leon.
TIA
Raymond
The switch I bought is marked with code 5GG941431D. (10 pins) This also came with a 4 inch extension wiring.
The one it replaces in my car is 5GO941431AH. (8 pins)
Does anyone have any pinout diagrams for these switches to see if its possible to change the extension wires to see if this will work with my Leon.
TIA
Raymond
