Help Towing Wiring colours needed for 20vt toledo

[sonic_vi]

Hi guys

fitted my new 03 20vt toledo 1M with a towbar (mainly for carrying my downhill bike but also to pull a small camping trailer when needed)

figured out most of the wires I think but does anyone know the colours of the following in the bootloom?

fog
ind rh
ind lh
brake light
sidelight rh
sidelight lh

cheers

Russ

 

[Muttley]

Trailer socket takes the following wires

Left turn signal	Black/White
Left brake light	Grey/Black
Left tail light		Red/Black
Rear fog light		Grey/White
Earth			Brown
Right brake light	Black/Green
Right turn signal	Grey/Red

 

[sonic_vi]

Nice one cheers

 

[sonic_vi]

Trailer socket takes the following wires

Left turn signal	Black/White
Left brake light	Grey/Black
Left tail light		Red/Black
Rear fog light		Grey/White
Earth			Brown
Right brake light	Black/Green
Right turn signal	Grey/Red

Actually just noticed there should be 2 tail lights and one brake light feed

What colour is the right tail light?

 

[Muttley]

The wiring colours are copied from the Elsawin diagram for the trailer socket and should be regarded as officially correct.

A very quick google finds lots of examples of the standard trailer socket wiring, such as this one.

http://www.towitall.co.uk/towbars/wiring.aspx

1) Left indicator
2) Fog
3) Earth
4) Right indicator
5) Right side light
6) Brake
7) Left side light

My analysis of which half of the stop/tail dual filament was connected to each wire was incorrect. What I should have said was:

Trailer socket takes the following wires

1. Left turn signal	Black/White
7. Left tail light	Grey/Black
6. Brake light		Red/Black
2. Rear fog light	Grey/White
3. Earth		Brown
5. Right tail light	Black/Green
4. Right turn signal	Grey/Red

 

[sonic_vi]

Cheers for that. Yeah i found a multimeter at work just after posting and sussed it. Tested it on one of the trailers at the office and we are all good

Thanks for that have a good xmas

Russ