Maxton design front splitter

[Wilto]

Calling all Maxton design front splitter owners.
I have recently purchased a V2 splitter and V2 side defuser, what method did you use to fix the splitter? do you have to remove the bumper to get to the nuts that's supplied with it.
I have thought outside the box, and maybe a bead of Tiger seal and then 10 or so collapsible pop rivet's, the ones that end up as a star shaped on the blind side.
Any thoughts guys.

 

[Oliver Pawley]

Mines done with a thick line of tiger seal and about 10 self tappers, I think that combo is the go to for everyone.

Holds on well , haven't had any issues

Sent from my VOG-L09 using Tapatalk

 

[Syphon]

If you get a chance to photograph the process and fancy doing a step-by-step guide, we'd welcome it in the Resources section https://www.seatcupra.net/forums/resources/categories/leon-mk3-2012-2020.7/ @Lozzy15 is our resources curator if you need a hand.

Oli I think it was you I was talking to at the meet about removing the badge? I'm still thinking about one for the Ibiza.

Cheers,

Scott

 

[Oliver Pawley]

If you get a chance to photograph the process and fancy doing a step-by-step guide, we'd welcome it in the Resources section https://www.seatcupra.net/forums/resources/categories/leon-mk3-2012-2020.7/ @Lozzy15 is our resources curator if you need a hand.

Oli I think it was you I was talking to at the meet about removing the badge? I'm still thinking about one for the Ibiza.

Cheers,

Scott

Sure was, I definitely think it would look good!

Sent from my VOG-L09 using Tapatalk