Steering Column Trouble Code

[extremo7]

Hey guys,

I have a Seat Leon Cupra 280 and have this error in the steering column module:

B114913 - Windshield wiper intermittent mode switch
Open circuit
static

I bought the car with this error code, I've researched a little bit and found I would need the previous clock spring module to get the old coding but I dont have acess to it anymore.

Anyone know how i can fix this? Everything works as it should just getting annoyed by the error.

thanks

 

[East Yorkshire Retrofits]

You don't need the old steering wheel control module to copy the coding, it's 2 bytes. Extremely easy to manually configure

If it's correctly configured, then I'd be looking at the stalks themselves

 

[cairus]

Hey guys,

I have a Seat Leon Cupra 280 and have this error in the steering column module:

B114913 - Windshield wiper intermittent mode switch
Open circuit
static

I bought the car with this error code, I've researched a little bit and found I would need the previous clock spring module to get the old coding but I dont have acess to it anymore.

Anyone know how i can fix this? Everything works as it should just getting annoyed by the error.

thanks

ACC?

If No with normal ccs

Unit 16 Coding: 9400

With ACC:

Unit 16 Coding: E400

No Warranty

 

[extremo7]

Thank you guys for your replies , I will try tomorrow and will post back with an update

 

[extremo7]

ACC?

If No with normal ccs

Unit 16 Coding: 9400

With ACC:

Unit 16 Coding: E400

No Warranty

Hello again, i only have acess to Obdeleven is it possible to do this with it ? Long coding? Thank you

 

[cairus]

Yes

 

[extremo7]

Yes

Thank you so much for your help , error fixed and everything working as it should