Wheel Camber

[hudgebadger]

Hi all

I had to replace the rear tyres as they were worn on the inside.
So on the advice of the garage I had all the wheels checked for alignment and camber.

To cut a long story short, they had the car on the ramp and were ready to start to adjust the camber on the rear wheels but could not find were to adjust them.
In the end I had to leave the garage with nothing being done apart from being safe in the knowledge that my car does need to have its wheels aligned!

So my question is the wheels adjustable and if so where is it?

Thanks in advance

Chris

 

[90landrover]

I do not think there is any way of adjusting the camber, maybe the bushes need to be changed on the rear arm.

 

[allias]

I dont know what suspension is on Alhambra but if its streght beam then there is no easy adjustment for camber. If its multi link suspension then proper place need to look for adjustment bolts or shifting plates (like on few VW cars) to be able adjust angles on rear.

 

[hudgebadger]

Hi all

Thanks for the replies.

I take it I am replacing the bushes on the rear as there are what corrode and cause the camber to then be out.

regards

Chris