-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
Latest activity
-
SuperV8 replied to the thread Low dust brake pads.Cool, presuming you fitted the piston side handed pad to the correct side? edit# haha - it has only 1xx wear indicator - so you can't...
-
You know I love to document everything :happy: Ceramic pads: Zimmermann pads on the right Pads in the caliper bracket
-
Tell replied to the thread Side assist warning light.Have you checked the sponsor side of the board ?. The actual parts catalogues come and go on the net. Others probably have one to hand... -
nd-photo.nl replied to the thread AGM Battery.Exactly this. I also replaced my battery after I bought my Cupra. I went from a Banner EFB battery to a Exide AGM battery. Same... -
The bottom line is, if this is the direct AGM equivalent of an EFB and your car has that frame size, capacity, CCA (EN) and terminal...
-
James_R replied to the thread 1.4 FR Coolant change.According to the brand, it is not necessary to change the coolant unless contaminated. -
SuperV8 replied to the thread 2019 Xcellence Lux ST tracking.It's not technically difficult "in theory" - slacken off subframe bolts, move subframe - and re-check geometry, but I suspect is beyond...
-
-
You know I love to document everything :happy: Ceramic pads: Zimmermann pads on the right Pads in the caliper bracket -
In the meantime I have a little bit more experience with the ATE Ceramics. Again, this is my personal experience. I use them combined...
-
nd-photo.nl replied to the thread Low dust brake pads.You know I love to document everything :happy: Ceramic pads: Zimmermann pads on the right Pads in the caliper bracket
-
Andyt9763 replied to the thread AGM Battery.Cheers,appreciate the feedback
-
nd-photo.nl replied to the thread Low dust brake pads.In the meantime I have a little bit more experience with the ATE Ceramics. Again, this is my personal experience. I use them combined...
-
llinasenc replied to the thread Footwell light retrofit.Don't you have the front ones? Quite strange. Mine is from November 2020 and have them. I also added the rear ones, with an AliExpress...
-
mapm1998 replied to the thread Footwell light retrofit.Thanks! However, I’m in Portugal so I cannot go to you… If you could help me with the overall steps (so to what pin on the BCM I need...
-
Five days worth of commuting turn these black!
