Seat Leon Cupra Widebody AWD Built Engine, Now Interior + Further tuning of engine !

mYGeL

Cupra Widebody
Epiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiic
:1st:

Thanks :D


One of the only reasons I keep coming back to visit this site... EPIC mate :)

Thanks Mate :)

This is seriously nice! Well done

Thanks :D trying my best to do a 1 off :p

Just godt back from a ski trip to Austria today, and HAD to check the thread :D
AWESOME once again, and for the love of god, please dont assume we dont wanna see "boring" pictures, it's really great to have pictures and nice to follow step by step.
i'm really looking forward to more updates man ! :D
if it works out on yours, i'll take a drive cross the bridge and DEMAND you to mod mine aswell, haha. eventhough i can only drive it for 2 years before MOT/Syn/Besikted ? what ever its called. then ill have to trash it.

Hope you had a nice ski trip! :)

Ok i will not keep the pics for my seld and put them out as soon as i have them ;)

Hehe i have a extra rear 4x4 Subframe ;) So just little more pieces you need...
Just take the propshaft of and hope they dont se the difference xD

This leon is immense. Keep up the good work :)[/QUOTE

Thanks, I will do my best! :D

Only just found this, its amazing!

Thanks and welcome to the thread ;)
 

mYGeL

Cupra Widebody
Slow on updates as i have been sick but will continue next week.
Also needed to order one new rear Driveshaft. or i could have just bought a new inner joint but got a complete driveshaft cheaper than just that parts.. Should arrive on Monday or tuesday :)
Hope im feeling better by then so i can continue and get it done..
 

Andreas K

Guest
I had a nice trip, thank you very much :)
Sounds nice you arent gonna hide the pics away, because i realy enjoy following this projekt. especially the 4x4 stuff.
when you are done with the 4x4 i rly would like a talk with you, maybe take a little ride to sweden and see it if its for show ;)
hahah, yea just take of the driveshaft, then its 2wd again, no probs... could be fun to try though :p

Sad that you are sick, hope u get well soon !
 
Last edited by a moderator:

mYGeL

Cupra Widebody
I had a nice trip, thank you very much :)
Sounds nice you arent gonna hide the pics away, because i realy enjoy following this projekt. especially the 4x4 stuff.
when you are done with the 4x4 i rly would like a talk with you, maybe take a little ride to sweden and see it if its for show ;)
hahah, yea just take of the driveshaft, then its 2wd again, no probs... could be fun to try though :p

Sad that you are sick, hope u get well soon !

Im feeling little better now :) at least so well that i could work some hours yesterday.

This is not only for show but show and go haha ;)

Get well soon man and finish this!

unreal!

Im feeling little better now so gott little done yesterday atleast. Thanks :)
 

mYGeL

Cupra Widebody
I couldnt stand sitting home no more so i went to the garage yesterday to get little done.
feel much better but still not 100% :(

Sorry for some bad quality pics. My phone isnt the best :/

But i atleast finally cutted a hole in the boot floor and test mounted the steel subframe.
Will test the Alu also but we need to be 2 to get it upp easy. hope that fits good also or i just have to cut some more. :)


402415_10150514249740168_540330167_9141250_594411906_n.jpg


425153_10150514253815168_540330167_9141251_1734501821_n.jpg


430084_10150514323140168_540330167_9141379_463701857_n.jpg


425356_10150514325800168_540330167_9141387_736057182_n.jpg


396696_10150514335735168_540330167_9141421_428863190_n.jpg


409376_10150514336115168_540330167_9141424_1489494898_n.jpg


428741_10150514337225168_540330167_9141429_834531875_n.jpg


417127_10150514394515168_540330167_9141535_1761632297_n.jpg


401406_10150514394660168_540330167_9141537_458465422_n.jpg


421398_10150514428350168_540330167_9141652_516604207_n.jpg


399920_10150514428895168_540330167_9141653_1114008499_n.jpg


423301_10150514430110168_540330167_9141656_1985059957_n.jpg



Then demounted the front subframe and cleaned the parts.

400293_10150514435280168_540330167_9141666_559145039_n.jpg


Feels better to mount clean parts later. :)


Next I have to do is to take down the S3 Gearbox, and clean it off and also open it up
to check if the Quaife i have in the Cupra FWD GearBox is the same.

I asked Quaife and they think it is the same but dont know 100% so got a drawing and also have the old OEM Diff from the Cupra gearbox to check with, To be sure it will fitt and i dont open the diffed cupra box if not needed.

If it isnt the same i will try to sell the cupra box with the diff in it, but hope it fits. :)


Like this it looks there right now. quite much parts but still not everything haha :rolleyes:

420304_10150514435950168_540330167_9141668_207854056_n.jpg
 

air121005

Active Member
Sep 28, 2006
1,609
6
Worcestershire
not sure how i've missed this thread :blink:

anyway......i've read most of the previous 21 pages........ truly awesome build!!!

loving your work!!!
 
Last edited:

mYGeL

Cupra Widebody
Still not feeling good.
Besides that i am also trying to find a new work so havent been and worked with the car as much i have wanted lately. :/ But have had little done atleast.

also still waiting on Turbo to come as there was some missunderstandning about the order and what turbo and so. But should be on the way now or very soon. :)

Started to clean of the worst mess from the gearbox.
397022_10150523769165168_540330167_9168199_754352284_n.jpg


Test fitted Fueltank.
430546_10150523770015168_540330167_9168202_608067934_n.jpg


It fits good but need to do little modification on the flor with a hammer. :p

and also need to do 2 new bolt holes
401508_10150527044305168_540330167_9174501_1338793293_n.jpg


431581_10150527044920168_540330167_9174503_1764515911_n.jpg


the Fueltank i bought was missing the fuel filler pipe.
430170_10150527042095168_540330167_9174498_2126617994_n.jpg


first i was going to cut of the one from my oem tank and connect somehow to this tank.

but i checked under the Leon Supercopa racecar thats in the same garage to check what tank they use on them as they have double intank pumps i saw on the info brochure..

turns out they use the Quattro/4motion tank. exactly like the one i have but complete with pipe :) But on that they have extra fuelfilling things for fast fuelstops as seen on these pics.
429804_10150527045860168_540330167_9174505_130471365_n.jpg


But Easier to fix that than the thing on the other tank..
So we did these parts. with a gasket betven them should be thight :)
404526_10150527046725168_540330167_9174509_438193351_n.jpg


420200_10150527047525168_540330167_9174511_1142925979_n.jpg


Forgott to take picture but also Mounted the USP Stage 3 Auxilary pump in tha tank.
And It was a hell to get it right haha :p

419021_10150527048430168_540330167_9174514_1076245762_n.jpg


Fuelpumps and so mounted in tank and ready to be mounted on the car
430521_10150526955960168_540330167_9174348_1502924682_n.jpg


395731_10150527043285168_540330167_9174499_1875220006_n.jpg


also cutted out the metal piece that we will weld in the boot floor.
420802_10150529018330168_540330167_9178288_1523008012_n.jpg




Also found an interresting thing on the net, the Polarfis advance module that can be connected to instrumentcluster to get live data from ECU. Will be nice to have controol on everything and maybe dont need the computer and vagcom with me to se and logg things when i want :)

Only thing was that i only have the smal display and to get that thing working i need the big display..

So bought a instrument with big display... :)
405632_10150524741670168_540330167_9169733_1326691807_n.jpg



well that about where i am right now.
Hope the Turbo things will show upp soon and also that i can stop beeing sick so i can continue at full speed again.. :)

Btw
Nobady that wants to buy
S3 Aluminium Hubs or USP SS Braided Clutchline or KW Arbs with bushes :p

Cheers
 
Last edited:

mYGeL

Cupra Widebody
not sure how i've missed this thread :blink:

anyway......i've read most of the previous 21 pages........ truly awesome build!!!

loving your work!!!

Thanks nice to hear :)



Quality build mate keep it going !

Thanks i will try :)



Wow, fantastic build/thread - will the upgrades never end??? :happy:


hehe you never know with me haha :p
Thanks ! :D

Wow this thread is magic, your progress and work looks top notch! Keep it up, I look forward to more!

Thanks! :D Will update as soon as i can :)
 

Andreas K

Guest
Looks nice :) hope you get well soon !
How much would you want for the KW arbs and bushes ?
 

mYGeL

Cupra Widebody
Beautiful car mate and excellent work. Oh and you have to much money :lol:

Thanks mate! :D happy to hear that you like it :)
Well im doing everything myself of course with help from friends so it isnt so expensive..
but of course theres quite a lot money put in to this car.. to be honest it way to much :( :p

WOW! :O don't know what else to say! Absolutely amazing mate!!!!! Well done!!!!


Thanks mate!! :D Happy that you like it! :D Always fun to get comments and appreciation on all hard work :D
 

mYGeL

Cupra Widebody
sorry for being bad on updates. Just have had so much other things lately so havent been and worked with the car as much id want to. :(

But heres a couple of pics.

Fueltank Donor :p Seat leon Supercopa
418217_10150539168320168_540330167_9202344_223790268_n.jpg


Tank test fitted.. Need to do 2 bolt holes for it to get the second strap on..
427976_10150555874990168_540330167_9251208_1971246280_n.jpg


423547_10150555875360168_540330167_9251210_317630144_n.jpg


419855_10150555875385168_540330167_9251211_890504909_n.jpg


Started to fit and weld the flor. now it is completly welded and fitted. Just some paint and body left to put on.. we welded it all around so everything is stiff and so..
422231_10150555876205168_540330167_9251218_699138399_n.jpg


Also got the rear piece of exhaust ready to fitt.
419325_10150555879110168_540330167_9251222_587477239_n.jpg


wonder what will be done with this car ;) A brand new Skoda with less than 50km on it. ;)
not my car but my friends who helps me little with my car, but thats another story haha :p
420041_10150555875405168_540330167_9251212_1429578949_n.jpg


396336_10150555875615168_540330167_9251213_295394455_n.jpg


not a big update im afraid still waiting on turbo bits from USA to be able to continue..
Maybe this weekend or latest next wekend atleast all hardware should be fitted and bolted upp on the car.. then just some electronics left to sort out...
wonder how that will end upp :think: :p