hub

Hi Folks Does anyone have/could get info on the front hub nut tightening sequence & torque settings for an Ibiza 2016 1.2 TSi (6P5 CJZC). I am about to replace wheel bearing hub. I have been searching various forums & workshop manuals, all with conflicting/confusing results. Thanks in advanced...

Hey today my and couple of friends tried lowering the car (both have done it on different cars) got so far on RDS but we couldnt get the part off without the hub spreader tool ive heard from many people use a screwdriver or similar but we tried that extensively and as the car is 8 years...

Does anyone know where i can get a new front hub nut from as the thread is wearing off mine?

OK Guys the bosses Wife drives a BORA 1.6 on a W plate can get reg if needed. On Sunday He was changing the Front Pads and when removing the caliper he stripped the thread from the Hub can you tell me if these are the same hub across the range This could earn me some brownie points with...

HHEELLPP!!! Just went to change wheel on the car and 2 of the 4 wheel bolt holes have completely lost their thread. Basically only 2 bolts securely holding the rear wheel on. The thread has gone completely as bolts simply slide in and out with no resistance. Now, is it a big job to sort this...

I need a new hub carrier and am just wondering if buying a second had one is ok or if a brand new one is needed? :) Also would my current hub flange/wheel bearing assembly be easy to press into the carrier or will i need a press? Done a quick search but cant seem to find a definitive...

Hi all, If any of you have been following my camshaft/timing issue thread, you'll know I had also got a knocking noise which apparently turned out to be a loose hub nut (the big ass nut holding the hub on as far as I'm aware). Anyway, this was tightened up and all ok.... However, last...

Hi, Can anyone tell me the size of the hub for PD150 TDi(288mm brake disc)? Is it the same size as the petrol 312/323 disc setup? Did a search and can't find anything.. Thanks in advance! :D (wondering why I've stated disc sizes? I've got 330mm discs on the standard hub. Just wondering...

Hi, I was cleaning my car this weekend (first time since before Xmas as I haven’t seen the point to doing it with all the salt and grit on the roads) when I came to clean the alloys. At this point I noticed something that has got me seriously worried! Whilst the alloys and discs look fine...

Im wanting to replace my front wheel hubs, as the previous owner has snapped the brake disc location screw inside the hub. Have just been looking for prices and found this...

Hi Guys, newbie here. Just wondering if anyone knows the torque settings for the front hub bolt on a Leon TDI 140? I have to remove the CV Boot tomorrow :censored: Thanks Richard.

Any ideas how to do this? Used a massive breaker bar to undo the nut but now I can't get the threaded part of the track rod end out of the hub. Even with a metal mallet and by jacking the wishbone up. Any tips? Thanks It's only to change the steering rack gaitor as it's in about 3...

Hi all, I did search first but couldn't find the answer to my problem. I had a bad case of understeer and slid into a curb with the front right (drivers side) wheel. The guy at the garage said I have bent the hub and very possibly the strut. He has advised me to buy a second hand...

I had nighmare day and to top it off rear bearing gave up the ghost on the way home and almost put me in a river. Anyway I have removed the nut and washer from the drum (no small job) but as the bearing has gone big time I can't get the remains of the bearing or drum off so has anybody got any...

Just after some confirmation of what I think is going on here? Booked car into main dealer to have wheel bearing changed. Dealer rang me up to say hub was damaged in the process of removing wheel bearing and I need a new one. I visit dealer and ask to see damaged hub. I inspect hub...

just wondred if any ony could tell me the size of tap id nedd for the front hub on my 03 lcr for ther wheel bolts:confused: thanks.

Hi all had a quick search but no joy. Got my wheel bearing in and the hub is on my PD100. I'm looking for the Torque settings for the following. Driveshaft nut. 36mm with tabs. I have a new one of these. Strut clamp bolt/nut. Ball joint bracket bolts. Track rod end nuts...

to cut a long story short.. Bought my car with OZ superleggas 17" which have spacers on the rear The previous owner left the standard wheel bolts which are way to small, i only turn them twice and they are tight which leaves my car worrying to drive! The rear hubs have damage to the...

Hi, I've been wondering, since some of my caps of my Light Aloy wheels are missing or damaged is there an option outside of the regular dealer that I can turn to. Like websites that sell them depending ont he diameter. I don't need the seat logo on them and the dealer price for them is very...

Been trying to get it off for hours, Just cant undo it to get the strut out, The other end just keeps on spinning and cant grip it enuff to stop it, Any ideas?