injectors

hi all anyone any idea on what the CC are on the standard leon cupras 180bhp? and if this will fit a AYP engine as there from an AUQ? cheers

How much are the PD130 Injectors and the standard turbo from a stealer? I know that the injectors on our PD arent cheap like a petrol brothers! Any one got any prices? Cheers chaps

Guys Anybody know a good place to buy recon pd injector (150) Thanks Glynn PS I only want 1 so allards apparently only sell in sets

Apoligies if this has been covered, but does anyone know where to get bigger injectors for a mk2 Ibiza TDI 90? And roughly how much they'd cost. Also, would a specialist have to fit them and do something to the ECU? If i wanted to have my car remapped aswell, should i get the injectors first...

Sorry if this has been discused before or is a no brainer but im not too sure but is there any point in uprating the injectors on an LCR unless your going for a big turbo upgrade?

HI Guys and Girls Does Anyone know if the 1600 sport or 1800 turbo injectors fit a 1400 engine? Many Thanks Alex

Hi guys need some 440c injectors and have seen these, which are same cc but different make as opposed to bosch, anyone had any joy or probs with these...

Hi Guys I have a polo 100bhp TDI I wanted to fit a turbo from a 130bhp golf and injectors along with intercooler , remap I spoke to jabbasport today who said injectors are not needed is it worth me getting the injectors anyway as the price is only £80 or is it a total waste of money...

As the title say's I have decided to just go with a ko4 conversion,obviously many parts need to be changed but i'm struggling on which injectors to use :shrug: Do the BAM injectors fit the AYP inlet manifold & fuel rail???? Being a large port head i'd assume swaping the manifolds over...

what effect would it have on my 1.6 if i put 2.0 injectors in and altered the fuel pressure regulator?

Hi A mate said today that his friend heard on a TT site that you could fit Scooby injectors to a VAG engine. To all the wise knowledgeable Seat owners on here - is this the case and would it be jap injectors or Uk spec. Any advice much appreciated. cheer Kev

517bhp and 378lbft torque from 485bhp and 355lbft torque Up 32bhp and 23lbft from its new manifold and 75mm t'body. New injectors needed as 620's previous maxed out over 5K rpm as old dyno belowas ref, Cams drop in next. and re dyno again to see. Big thanks to James & Kev @...

Seems to be mixed opinion on these when doing the GTRS eliminator conversion.... wondering what peoples thoughs are on the following: When using the standard 3bar FPR on the LC - 550cc? Or could I get away with 440cc if I upgrade to the 4bar FPR? Any other suggestions ? Cheers Raf

Hi, I keep bashing into a wall so it seems in getting hold of someone able to buy uprated PD(130) injectors 'outright'. Allard seems to have them for sale at 975 GBP + your old injectors in working state, which would be rather a crazy amount of cash as I'd have to buy new injectors to...

Rite ive had a search about on the forum but have had no luck. I was looking to no if its possible to change the injectors in a 1.6S to different ones out of another VAG engine, the like of the 1800 ? Wot benefits would I see in power wise etc ? Any help is appreciated.

Has anyone fitted tt injectors to a 180BHP cupra. Just wondering how hard it is to do , if it makes a noticable difference and what prices are involved. Want to find out before looking into bigger turbo.:D

This appears to be a common modification amongst the VAG engines especially the 1.8t In order to run bigger injectors the ecu either needs to be reprogrammed (if you can get into the relevant maps) or by modifying the sensor inputs in order for the ecu to cope. Bigger housing means more air...

If i look in ETOS for the partnumbers then they are both the same. But now my tuner claims that the PD160 has different injectors. It's hard to get my ibiza FR tdi over 200hp even with all my mods and this doesn't seem right to me:shrug: . What do you guys think about it...are they the same...

Iam soon gonna be ordering my garret kit. And for the power i want (300BHP) i was told BAM S3 injectors would do the job, but even too me they are very expensive. I have the chance of some Bosch Yellow's which i believe to be 370cc, will these be ok. Also what impedance rating i need, high or...

Some of you may have spotted I have a set of pd130 injectors going on Ebay at the moment, and in the for sale section. However, since putting them on I've been thinking of the potential of getting them tweaked myself, rather than selling them complete and using the £££ to put toward the Allard...