Hi guys so i've just had the turbo replaced on my car recently but it seems there is also a problem with the particle filter as well.
Car is 2010 seat leon CR fr TDI 170 with about 120,000 miles.
VCDS fault code bellow:
1 Fault Found:
009315 - Diesel Particle Filter
P2463 - 000 - Excessive Soot Accumulation - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Mileage: 193025 km
Time Indication: 0
Date: 2127.14.31
Time: 19:13:42
Freeze Frame:
RPM: 782 /min
Speed: 0.0 km/h
Pressure: 46 mbar
Hex Value: 0xFF01
Temperature: 138.0°C
(no units): 25.5
Mileage: 1660 km
Readiness: 1 1 0 0 1
Is there away to get past this problem or some sort of sensor that could of gone. But obviously it wont regen to clear as stuck in LIMP MODE.
Thank you.
Car is 2010 seat leon CR fr TDI 170 with about 120,000 miles.
VCDS fault code bellow:
1 Fault Found:
009315 - Diesel Particle Filter
P2463 - 000 - Excessive Soot Accumulation - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Mileage: 193025 km
Time Indication: 0
Date: 2127.14.31
Time: 19:13:42
Freeze Frame:
RPM: 782 /min
Speed: 0.0 km/h
Pressure: 46 mbar
Hex Value: 0xFF01
Temperature: 138.0°C
(no units): 25.5
Mileage: 1660 km
Readiness: 1 1 0 0 1
Is there away to get past this problem or some sort of sensor that could of gone. But obviously it wont regen to clear as stuck in LIMP MODE.
Thank you.