Currently own a Leon 1.9TDI Stylance and a 2.0TFSI FR. The 1.9TDI was remapped before the turbo went pop recon turbo was put in and the power has never been the same so far I've done the following: New MAF, New EGR, New Glowplugs, Leak Test, Remapped again the car is a PD105 that was at 145bhp it still has the same remap on it and runs like a PD105 when I floor it there is a lot of unburnt fuel that comes out the back which never happened with the old turbo, the unit itself appears to be highly reconditioned with blades intact and no shaft play and from a reputable company called Precision Turbos. Furthermore I was advised not to adjust the actuator as it was already set. Not sure what to do VAGCOM had the following codes prior to new parts EGR Insufficient Flow Detected and 3 Glowplugs Short to ground. I have cleared these codes and they haven't seem to come back after I have changed parts and the car does run fine with no EML lights just underboosting.
Any help would be much appreciated as I did make a thread on this before to no resolution.
Any help would be much appreciated as I did make a thread on this before to no resolution.
Last edited: