MIB1 to MIB 2 Cupra with seat sound - longcoding

[PaulusB]

I did a MIB1 to MIB 2 upgrade on a 2014 Cupra with seat sound - does anybody can share there vcds longcoding string for me. Who have a the same setup?

I have no backup camera only parking sensors.

Thanks.

 

[PaulusB]

up.

 

[niallain]

Did the same upgrade myself on my old FR and posted my experience

Seat Sound Retrofit - Someone on Spanish forum has done it!

I use the tread on the Spanish forum try G translate, there is lot of info. Pins on the qudralock - Channels: in case 8 speakers (PR code 8RM) 1,5 - rear right door 2,6 - front right tweeter 3,7 - front left tweeter 4,8 - rear left door 9,13 - front right door woofer 10,14 - front left door...

www.seatcupra.net

 

[PaulusB]

The vcp part i did al that and working ok. I get in vcds some errors that the module is not coded correctly. So was searching for vcds long coding string.

 

[Walone]

I did a MIB1 to MIB 2 upgrade on a 2014 Cupra with seat sound - does anybody can share there vcds longcoding string for me. Who have a the same setup?

I have no backup camera only parking sensors.

Thanks.

I take it that the 2014 Cupra, originally with MIB1 had Seat Sound from factory, but the MIB2 unit did not have Seat Sound?
This is the coding from my car, 2016 FR ST but it has MIB2 HIGH unit, I retrofitted Seat Sound myself (the parameters and subwoofer control were already there due to having the software 'hacked' previously). Ignore the 1556 fault code.