Seat Leon Cupra Widebody AWD Built Engine, Now Interior + Further tuning of engine !
- Thread starter mYGeL
- Start date
Nice work. Looks better without the stickers
Thanks
yes it does.. WOW( What more is there to say? )
hehe Thanks
BTCC Spoiler would look immence on it
Do you have a picture of it? i dont know how it looks.
That has to be the NICEST leon I have even seen! Fair play mate, you truely love your cars!
Im in the process of getting myself a Mk2 Leon pre-facelift. I have to settle for a small engine model as im only 17
Also were did you get your tail lights and how much were they?
Thanks
Thank you so much !
Cool i found the tail lights on Ebay. i can try to get the shop on there for you if i have the receipt left.
I dont know how much the JE Desig kit cost's in Uk but they are quite expensive especially if you want the Widebody.
Yes the plan was from the beggin to just do it straghit with the carbon. but then i decided i wanted it as a V-shape alla over the car everything on each side points at the same direction...
Little different from all the other that does carbon
i got the Idea after i saw a picture of the Bugatti Super sport where they did the carbon the same way and i like it.
i can't find the picture that i saw but on this one you can she the V in the middle of the car
It goes over the whole car. And we did the same on mine
just been reading your thread from start to finsh you have put alot of work and money into your car and it look awesome amazing job!!! 
just been reading your thread from start to finsh you have put alot of work and money into your car and it look awesome amazing job!!!
Thank you!
Yes quite much time and also little money spent for sure.
But i wanted something litle special
It is an aftermarket body kit yes, but modified little by me, Front has an extra lip or what ist called i put one extra set of sideskirts in the middle so it is widened also there.
and some more small things:
Nice to hear that you also like it
Fantastic write up and documented build thread
Really like the car man
I do my best
Thanks fun to hear!
Wow that looks fantastic, best colour too
Love the white dash
Thanks
Real fun to hear that some people like it
Im planning for some other things with the car this winter
![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
I will post pictures when i start
Now i have made a little upgrade on the car or maybe i should say inside the car
Changed the front speakers to MDS DC6 mkII
http://www.mds.se/sv/product/15133/MDS-Dynamic-6-5-MK-II
i forgott to take own pictures but that is how they look.
I also changed the amp for the front speakers to 2 fullfreq. Monoblocks.
MDS T3: Class A/B Hi-Fi Monoblock, 500Wrms in 4Ohm 0,09% Thd.
One amp 500w per side in the front.
Damn how loud it is now
The amp im using for my subwoofers (MDS DS1214x2) is this one.
not my own pics here but like this it looks
MDS TE7 Monoblock 3000Wrms 1ohm
http://www.mds.se/sv/product/15146/MDS-Torque-Extreme-TE7
the chassie
Double 50mm 0g connections.
Inside:
I have 2 Motorshows left one in Norway and one in Denmark before i park the car and start to take out and open the engine for little engine moods to next season.
New Head with Ferrea valves, new rods and pistons, GT3071 kit.
And probarly some more things i forgotten now
Changed the front speakers to MDS DC6 mkII
http://www.mds.se/sv/product/15133/MDS-Dynamic-6-5-MK-II
i forgott to take own pictures but that is how they look.
I also changed the amp for the front speakers to 2 fullfreq. Monoblocks.
MDS T3: Class A/B Hi-Fi Monoblock, 500Wrms in 4Ohm 0,09% Thd.
One amp 500w per side in the front.
Damn how loud it is now
The amp im using for my subwoofers (MDS DS1214x2) is this one.
not my own pics here but like this it looks
MDS TE7 Monoblock 3000Wrms 1ohm
http://www.mds.se/sv/product/15146/MDS-Torque-Extreme-TE7
the chassie
Double 50mm 0g connections.
Inside:
I have 2 Motorshows left one in Norway and one in Denmark before i park the car and start to take out and open the engine for little engine moods to next season.
New Head with Ferrea valves, new rods and pistons, GT3071 kit.
And probarly some more things i forgotten now
Forgott these pictures
Remember to check your camfollowers!
This is what can happen when you Camfollower fails.
Out with the old
In with the brand new
Remember to check your camfollowers!
This is what can happen when you Camfollower fails.
Out with the old
In with the brand new
i also found these pics on my Rods and Pistons and Ferrea Valves
No pictures of the turbokit here but soon i will have that also.
We will start mount in a couple of weeks.
No pictures of the turbokit here but soon i will have that also.
We will start mount in a couple of weeks.
here the car is
in 100+ motorshow in Finland
on the way from Finland.
here it is on Oslo motor Show Norway
Next week i will go to Scandinavian Tuning Show in Denmark
in 100+ motorshow in Finland
on the way from Finland.
here it is on Oslo motor Show Norway
Next week i will go to Scandinavian Tuning Show in Denmark
Cant belive there hant been a bigger response to this thread, i know a lot will say their not into kits but you've gotta appreciate the effort, stunning work
Ic3man88
Guest
Cant belive there hant been a bigger response to this thread, i know a lot will say their not into kits but you've gotta appreciate the effort, stunning work
hehe maybe because my English spelling isn't the best? But i do my best
It's a kit but with a couple of my own mods to it.
The Carboon hood is all Custom made with my own original hood as a mould.
Thanks
Thank you!
I see this car in 100+ motorshow, looking really nice
Ok cool Thanks!
We had very fun in Soumi/Finland
here is some pictures from Scandinavian tuning Show
in Bellecenter Copenhagen / Denmark.
When arriving to Copenhagen to Meet Marc aka agentme on SCN.
Little dirty after driving all night.
And also the winterrims are mounted as it was snow in Stockholm when leaving.
But they are quite nice anyway
2 Streetfire girls
The show is opening.
A inside picture.
Marc's aka agentme's 600+ cupra with mine cupra at the show.
Soon soon the engine moods will start
Got some Brembo 8piston Calipers now also jut have to find out what parts is needed to get them mounted.
Alsdo looking for an engineblock so i can start building on that then just change the engine.
Does somebody knoiw for sure if the AUQ 1,8T 180hp
Engine block is the same and can be used? Only the block.
Cheers
Michel D.
in Bellecenter Copenhagen / Denmark.
When arriving to Copenhagen to Meet Marc aka agentme on SCN.
Little dirty after driving all night.
And also the winterrims are mounted as it was snow in Stockholm when leaving.
But they are quite nice anyway
2 Streetfire girls
The show is opening.
A inside picture.
Marc's aka agentme's 600+ cupra with mine cupra at the show.
Soon soon the engine moods will start
Got some Brembo 8piston Calipers now also jut have to find out what parts is needed to get them mounted.
Alsdo looking for an engineblock so i can start building on that then just change the engine.
Does somebody knoiw for sure if the AUQ 1,8T 180hp
Engine block is the same and can be used? Only the block.
Cheers
Michel D.
Similar threads
