16'' x 7j 4x100 et35 over brembos

[mitch2028]

would this work with a 15mm spacer? so et20

 

[lm_gauci]

Depends on the caliper clearance of the wheel mate.


Image stolen from Bill

 

[ibizacupra]

depends on spoke design
I used to run 7x16 Speedline 5 spokes which cleared with 0.75mm clearance. ET35, 7x16 rims

its all in the spoke design.
Some compo MO's with curved spoke design clear fine also in 7x16 ET35

 

[SeatR]

i've got 7.5x16 ET 25, and it just clears

 

[mitch2028]

theyve got a very curved spoke design so i might just risk it.
bill will i have any more difference in clearance if its a brake kit purchased from you? got reciept for it if you need reference to which kit

 

[lm_gauci]

The Brembo kit from Bill requires 38mm caliper clearance. What wheels you looking at getting? Cant you get them measured to double check they fit first?

 

[ibizacupra]

theyve got a very curved spoke design so i might just risk it.
bill will i have any more difference in clearance if its a brake kit purchased from you? got reciept for it if you need reference to which kit

as said 38mm is the caliper clearance on my kit which is same offset as ibiza cupra-r requirement.

 

[cuprachrissy]

alright guys sorry for bringing up an old thread but thought it'd be better than writing up a new one, are these wheels be the right et for my car?? got standard brakes (maybe getting brembos v.v soon). should be picking up these wheels tonight, absolute bargain, diamond cutted

Set of 4 BBS RX211
7jz16
4x100 stud pattern
polished lip and black sides of spoke
but polished faces
look absolutely mint
et 42
hub 57.1

 

[Reuvers]

ET 42 is quite high.

I recon you'll need spacers, not only for looks, but to clear shocks/coilovers

 

[cuprachrissy]

will 15mm spacers do? back and front? or just back??

 

[Reuvers]

15mm should be enough on the rear yes.

front with 8 maybe.

You can easily pull off 20mm on the rear as well I would imagine.

but its really guessing without physically putting the wheels under the car. I'm affraid I don;t know exactly what fits and what doesn't.

 

[cuprachrissy]

ok will have to buy and try

 

[cuprachrissy]

Set of 4 BBS RX211
7jz16
4x100 stud pattern
polished lip and black sides of spoke
but polished faces
look absolutely mint
et 42
hub 57.1

has anyone had any experience fitting this "ET" on there wheels before? i know reuvers thought i needed spacers but dioes anyone know for definate? thanks

 

[cuprachrissy]

has anyone had any experience fitting this "ET" on there wheels before? i know reuvers thought i needed spacers but dioes anyone know for definate? thanks

anyone.....???

 

[lm_gauci]

You'll definately want spacers at the back and as reuvers said 15mm or 20mm wouldnt be a problem.

Isn't your car off the road at the minute? Could you not trial fit the wheels and then see how much space you have etc etc before buying the spacers.

 

[cuprachrissy]

yer thats true....how much are spacers?

 

[kyle'87]

yer thats true....how much are spacers?

Anywhere between £40-£110 incul all the blots etc. Depends on what material you want them in as to the prices and the sizes. Think badger5 sells some as well as few other sellers on here.

 

[lm_gauci]

I picked up some second hand 15mm eibach rear spacers that cost me £60 i think.