calliper

Hi all! I've recently replaced a OSR calliper on my leon for being siezed. I replaced the rear discs and pads also! However since I noticed the handbrake did not feel great and had a bit too much travel. Seems to be binding (working harder) on the OSR. I checked the adjustment mechanism to...

Has anyone replaced a calliper piston dust seal on a brembo calliper if so how tricky is it I have one that's split and as I'm fitting new disc and pads thought I change it. Cheers guys

Can anyone recommend a good quality calliper paint please, i have seen i few types on ebay but not sure which is best cheers, owen

Hi, Well after having one of my rear brakes stick and cooked my pads and disc up i upped for some new ones. now after changing one side fine, i came to the other side and the piston only just went back in after brute force with the wind back tool so pumped brakes again to push it back put...

Looking to paint my callipers, but unsure as what colour to do them. Red is the first idea, but would like to see opinions and what other people have done. Pictures would be good.

any ideas guys pics would be a great help???:D

-------------------------------------------------------------------------------- HI EVERYONE I POSTED THIS EARLIER Boost problem -------------------------------------------------------------------------------- have a problem with my cars boost, i was driving on motroway last night...

Hi, Looking for an upgrade in front brakes for my car, now I know that the Cupra callipers will fit straight on, just wandering what else will fit? Have searched and came up with the Corrado VR6/G60 front callipers are the same, but surely some of the other VAG cars use the same? Thanks,

Yesterday I fitted new discs and pads on the back. However the pistons were out a bit too much so handbrake wasn't working flush. So I took callipers off again and turned the wheel. The one side worked great and went inside properly and is fitted nicely now. However the other side...

I’ve got Ferodo pads, and EBC Ultimax dics fitted. The driver’s side pad is in constant contact with the disc, and as you would guess the disc is very hot (as it would be) So my question is…. 1) Could the pad just be sat wrong with-in the calliper? 2) Is the calliper adjustable so I can...

hi does anyone know the part number for the brakets that hold the brembo callipers on to the mk3 ibiza cupra R hubs? Don't imagine they are that expensive, hope someone can help though:confused:

i'm going to paint up my callipers in a few weeks time and was wondering where i can get some calliper stickers from to put on them as a finishing touch?

hi guyz fited new front pads today & 1 of the bolts on calliper came off with the metal sleeve obviously ceased tried to undo holdind sleeve with pliers but no good ,for now i have just put it back in but where can i get ne wboly + sleeve? thanks

how do i make them go back in to put new pads in

have noticed the paint or laquer coming off my front callipers:shrug: . it looks terrible:cry: . was wandering if anyone has been back to the dealers to see what they say? if the cars still under warranty aswell does that make a difference.

Mk3 1.6 Disc Size & Calliper Carrier Q's + Conversion Update. Hey Guys, Does anyone know what size discs the Mk3 1.6 Sport should run? I'm going to be doing the 280mm conversion (along with rear disc conversion which is near enough 99% complete) and when I went to SEAT they said it would be...