selecting

First of all, merry christmas to everyone. Secondly... was my own stupid fault on this one.... Was doing a hard launch, crunched the gears pulling down from first into second... carried on through the gears. When I came to select first again it was almost impossible, its now...

About a year ago my gearbox was removed from my car, after being refitted its never really been able to go from 6th cruising speed to 3rd to get the revs up to over take someone!;) it doesnt want to go into 3rd but if i put it into 4th then it'll go into 3rd straight away! it goes from 6th...

on the LCR and any others with the same transmission, have you crunched into gears like prone 3rd gear when pushing on hard and fast?

Hi, Having some trouble selecting 2nd and 4th on my 16V Cupra. I did suspect the clutch as I think it is an original one on 120K but when I had a look at the shift mechanism it looks as though the cable that is controlled by the forward/backward motion of the level is too loose. Well it is...

I have a 2000 model Cupra 20VT and noticed today that it was very stiff selecting reverse gear, it would not select at all at first, but after a bit of faffing about with the lever, it eventually selected it, but was very stiff from the neutral position pushing it forward. Could it just be the...

Hi ya, i drive a Seat Ibiza Cupra 1.8t, petrol 2005 plate, i have noticed that occasionally i cannot get it to go into first gear, i have to let go of the clutch and try again, aftera few times it will eventually go into first. Has anyone got any ideas as to what this could be, or if it is...