012313 - Valve for Exhaust Flap 1 (N321) Cupra

[window60]

Hi All,

Just got a Ross-tech cable, and after doing the first scan I have noticed the below error. The car was re-mapped roughly around the time of the fault's first occurrence. I also have a Milltek Cupra R cat back. Any ideas?

-------------------------------------------------------------------------------
Address 01: Engine Labels: 06F-907-115-AXX.lbl
Part No SW: 1P0 907 115 C HW: 8P0 907 115 B
Component: 2.0l R4/4V TFSI 0020
Revision: 5BH16--- Serial number: SEZ7Z0F3686848
Coding: 0303000318070160
Shop #: WSC 66565 257 00032
VCID: 2B7BE4578A2DAF40A4E

1 Fault Found:
012313 - Valve for Exhaust Flap 1 (N321)
P3019 - 004 - Open Circuit
Freeze Frame:
Fault Status: 01100100
Fault Priority: 0
Fault Frequency: 9
Mileage: 50415 km
Time Indication: 0
Date: 2000.00.00
Time: 14:11:26

Freeze Frame:
RPM: 477 /min
Load: 42.3 %
Speed: 0.0 km/h
Temperature: 57.0°C
Temperature: 45.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 11.303 V

Readiness: 0000 0000

 

[lowibiza]

hello mate

just wondering if you have resolved this fault as i have the same on my mk2 cupra on a revo map

 

[window60]

Sorry about the delay, after speaking to the tuner most Cupra's display this code after a re-map. He assured me its nothing to worry about.

Rich