80-120 kph times

[angelday]

Hi!

I just made a test on my Cupra R, with an android app name Torque. There's a possibility to check 80-120 km/h time. I know in England there is mph, but if somebody has the possibility, pls check your time to compare to ours. My cupra R is mapped, FMIC, w/o cat. The number shows the time in 4th gear of course! It was 3.8 sec.
If you have your own time, pls share with us!

 

[nd-photo.nl]

Post more info like: how much bhp & torque?

 

[angelday]

Post more info like: how much bhp & torque?

I've never measured on rolling road, but the Torque app shows 240 hp and 350 Nm on wheels. Usually our cars lose 10% through drivetrain and gearbox, so my car has 265 bhp and 385Nm (284 ft lb) at the crank.

 

[747_727]

My car running almost the same power as yours so I will try and time it. In mph that's 50-75. I downloaded a 1/4miles app with times your 0-60 and 0-100mph I managed 5.78 which I'm happy with but ran out if road before I got to 100 lol.

 

[angelday]

My car running almost the same power as yours so I will try and time it. In mph that's 50-75. I downloaded a 1/4miles app with times your 0-60 and 0-100mph I managed 5.78 which I'm happy with but ran out if road before I got to 100 lol.

It's a very good time! I didn't try 0-60, because it's very difficult to manage good time due to wheel spin... :/

 

[747_727]

It took a few attempts to get a good start without too much wheel spin.

 

[angelday]

I tried again on the same road...the result... well I suprised: 3.3 sec. It was colder outside... this was the only difference compared to the last attempt.