SWANSWAY CUPRA Dealership

AmD Remap

liam_91

Guest
Hi, was thinking of getting a AmD remap and was just wondering if anyone else had them and how people rated them?

I have tried search and just seem to end up with a lot of off topic threads :confused:

Thanks in advance :)
 
Thanks, I think I will be going with the stage 1 ;)
Will I be fine running it with a forge 007p, green coton panel filter, forge tip and milltek cat back?
 
Don't listen to DK he is very biased ;) Me on the other hand..............................nah jokes aside they are great and you will be pleased. They recently did mine and I still have a big grin on my face!!
 
haha :lol:

Bit of a drive from Birmingham but I think i might end up going there then, as they have a deal on a remap and a milltek that i might have to take advantage of ;)

Now the only question is resonated or non resonated lol :think:
 
No more question, my arm has been twisted and im going for the non res ;)
 
The Milltek and most other system's come in 2 parts, center section and back box, so if you decide the non res is too loud you can swap the center section for one with an extra box.
 
im running a AMD stage1 map, miltek non res cat back, currently a green pannel with smoothed box and 3" cold air feed, 007p DV, autobahn88 tip, huge front mount, N75H, 249 bypass and a few other little tricks
car pulls like fook (when im boost leak free), still not met a R32 that can keep up, nor a scooby, a boxter, civic R, anoyingly saxo vtr and vts still get me off the line though but my 0-60 in the wet was 7.2... not to bad when you think of a slippy A40 with standing water along with budget tires and one of them being a slic on its inside edge, the boxter is 7.8 standard in the dry... you could say im happy with the remap and pulling 268bhp on a 122K engine before the front mount went in...
 
t32er said:
im running a AMD stage1 map, miltek non res cat back, currently a green pannel with smoothed box and 3" cold air feed, 007p DV, autobahn88 tip, huge front mount, N75H, 249 bypass and a few other little tricks
car pulls like fook (when im boost leak free), still not met a R32 that can keep up, nor a scooby, a boxter, civic R, anoyingly saxo vtr and vts still get me off the line though but my 0-60 in the wet was 7.2... not to bad when you think of a slippy A40 with standing water along with budget tires and one of them being a slic on its inside edge, the boxter is 7.8 standard in the dry... you could say im happy with the remap and pulling 268bhp on a 122K engine before the front mount went in...
Click to expand...

Fair play mate, sounds wicked!
AmD it is then :D

This is gonna get expensive haha
 
liam_91 said:
Fair play mate, sounds wicked!
AmD it is then :D

This is gonna get expensive haha
Click to expand...

that just depends on who ya know lol i paid 200 for my cat back (was resig) from a shop, got a swap with one of the guys on here for the non res section, got my tip for 40 from here, map was done on the cheap as was owed a favore, DV cost me £8 filter i already had here from my LC, just scour ebay for stuff get some bargains on there, i just buy stuff as its cheap on there and some time dont even want it lol
 
t32er said:
that just depends on who ya know lol i paid 200 for my cat back (was resig) from a shop, got a swap with one of the guys on here for the non res section, got my tip for 40 from here, map was done on the cheap as was owed a favore, DV cost me £8 filter i already had here from my LC, just scour ebay for stuff get some bargains on there, i just buy stuff as its cheap on there and some time dont even want it lol
Click to expand...

True, I suppose there are bargains to be had out there! You've done well though to get all of that for the amount you've paid lol. Gonna have to have a search on fleabay lol.

JamJay said:
AMD here too, really very good :)
Click to expand...

Glad to hear such good reviews :)
When I get all the full member privileges I will be messaging them for a price ;)
 
liam_91 said:
haha :lol:

Bit of a drive from Birmingham but I think i might end up going there then, as they have a deal on a remap and a milltek that i might have to take advantage of ;)

Now the only question is resonated or non resonated lol :think:
Click to expand...


There's loads of places near Birmingham that can provide you with a quality map / service

P-Torque

Stealth Racing

R-Teeechhhh
 
AMD are the dogs danglies :)

i went in with a jetex sealed induction (jabba heat shield) cat back miltek, and 007 (yellow spring) DV with a stage one map being done and got 272.6 bhp and 297 lb torque :)

great feed back on the car and future work to be done if wanted, waiting room is quality with a ps2 to play on or watch dvds, offers to take you to lakeside for some shopping whilst they work.

wouldnt take my car to another plae honeslty :)
 
You must log in or register to reply here.

Similar threads

Parcelshelf hanger pin
Replies
6
Views
872
Battoussai
Battoussai
sidy64
remapping cupra 300
Replies
6
Views
933
sidy64
sidy64
Remapping Recommendations
Replies
3
Views
200
R3k1355
MK R BOY
G28 Sensor
Replies
21
Views
2K
MK R BOY
MK R BOY
AceD909
Help Needed: Cupra R (1M) PR Code G92 — Which Front Top Strut Mounts Are Actually Correct?
Replies
9
Views
498
Battoussai
Battoussai
Progressive Parts, performance parts and tuning specialists
Top Bottom
Back