Boost leak

[Rob Kelz]

I have a vag com leads and vcds, can someone point me where to log to check for boost leak please?

 

[cupra.al]

http://www.ross-tech.com/vag-com/tour/logging.html
that is as much as i can help you ive never done it myself.

 

[Rob Kelz]

Lol thanks, I know how to log but need to know what block to log etc

 

[cupra.al]

in that case i have read its channel 8 and 11.

 

[Rob Kelz]

Ok mate thanks, I have vcds lite unregistered at the moment but think I'm gonna get it registered or go for full

 

[cupra.al]

if you have a nomad gauge pod you must have a boost gauge,dio you have a remap and how much is your car boosting too?

 

[Rob Kelz]

I do but i think its a bit dodgey lol gonna get a new one soon

i get around 8psi maybe 9

car standard apart from dv and pipe work

 

[Rob Kelz]

I do but i think its a bit dodgey lol gonna get a new one soon

i get around 8psi maybe 9

car standard apart from dv and pipe work

 

[Muttley]

Limitations of the shareware version:



Shareware Limitation(s):

You can only log groups 001-025. Groups 000 and 026-255 are blocked

Logging of Basic Settings is unavailable.

 

[Rob Kelz]

If 8 and 11 that's fine. Then lol get

 

[Rob Kelz]

Could someone do some checks on these logs please, Block 003, 008 and 011

Monday	8	October	2012	22:18:23											
06A 906 032 MJ		1.8L R4/5VT         0003													
															
	Group A:	003				Group B:	008				Group C:	011			
		Engine Speed	Intake Air Mass	Throttle Drive	Ignition			Bin. Bits	Absolute Pres.	Bin. Bits		RPM	Temperature	Temperature	Ign. Timing
	TIME			Angle Sensor 1	Timing Angle	TIME					TIME				
Marker	STAMP	/min	g/s	%	°BTDC	STAMP			mbar		STAMP	/min	°C	°C	°BTDC
	0.4	2160	33.22	27.1	10.5	0.8	Not Oper.		145		0.01	2040	75	28	20.3
	1.71	2600	65.64	100	10.5	2.11	Not Oper.		145		1.31	2440	75	29	12
	2.91	3120	74.5	100	15	3.31	Not Oper.		145		2.51	2960	75	29	13.5
	4.13	3640	90.64	100	15	4.64	Not Oper.		145		3.71	3440	75	30	15.8
	5.42	4200	97.89	100	16.5	5.84	Not Oper.		145		5.02	4000	75	32	17.3
	6.85	4760	111.86	99.6	18	7.25	Not Oper.		145		6.35	4560	75	34	17.3
	8.05	5200	122.11	100	18	8.45	Not Oper.		145		7.65	5080	75	37	18.8
	9.26	5640	141.11	100	12.8	9.66	Not Oper.		145		8.85	5520	75	39	18
	10.57	6080	146.06	100	12.8	10.97	Not Oper.		145		10.06	5920	75	42	14.3

 

[cupra.al]

might be worth posting the logs in a more popular area of scn as this thread hasnt had many views.

 

[Bondiblu]

3, 8 and 11 are channels you'd log on a diesel, but channels are different on a petrol vehicle.

 

[Muttley]

I think you want to log requested vs. actual boost. This is block 115.

See this thread (just above where you are now). The blocks (for a petrol engine) are listed in this document that is referred to in the thread.

http://www.seatcupra.net/users/saul/files/VAG_dbw_blocks.doc.

 

[Rob Kelz]

Ah ok thanks for the info