Can't unclip grill surround

[Bover]

Removing my grill to fit mesh/badgeless slats.. I've unscrewed the 3 star screws under the bonnet... unclipped the driver's side clip under the indicator, but can't unclip the near side indicator clip Any suggestions without breaking the plastic or damaging paintwork?

 

[AlpineWhite]

Same as the driver's side....

 

[Bover]

Same as the driver's side....

Yeah, but it's stiff and won't lift up over the bolt.. I can lift it up but not out, it's like it doesn't have room because of the headlight :S Do I have to remove my near side headlights
I know I shouldn't have to...

 

[AlpineWhite]

Can't remove the headlight until the grille is off!

It should just come out. Assume the nut is loose enough?

 

[Bover]

Can't remove the headlight until the grille is off!

It should just come out. Assume the nut is loose enough?

From what I can see, it does look loose enough yes, how would I loosen it?
(Cheers for helping)

 

[AlpineWhite]

http://www.seatcupra.net/forums/showthread.php?t=173947

Have look at the text around the third picture! There's a little plastic nut on the inside of the wing.

 

[Bover]

Ahh I see! Thankyou!
I unclipped the driver's side one without removing the indicator!
So I've just got to remove the indicator and I should be sorted, many thanks.

 

[GtiBoy]

Glad i spotted this i gotta clip my grill surround on at the sides to

 

[Krishen]

from memory its a 10mm spanner/socket that you need to unscrew it.

 

[griff82]

yer it is a 10mm did it the other week think the nuts are plastic thow so carefull not to chew them up...................like i did