Ccm 1m 2001

Seatmann

Rough around the edges
Sep 16, 2010
5,568
9
Scotlanda
Well all I can say is if for whatever reason the ignition thinks the key is in it it wont allow remote locking, whether that's the switch or barrel that does it I've no idea but if the switch is funky change it and see if the problem is still there.
 

Phillips1795

Active Member
May 17, 2010
171
0
Corby - Northamptonshire
Ignition switch didn't change the central locking but car starts better the old ignition switch was massively worn in comparison to the new one.

So whats next on the list to check?

CCM Changed/Tested
Several Remotes Tested
All locks work / no faults
Ignition Switch Replaced
 

Seatmann

Rough around the edges
Sep 16, 2010
5,568
9
Scotlanda
I wonder if the antenna wire could be bad, you can buy coaxial cable from the likes of maplins and try changing it, I can't think what else.
 

Seatmann

Rough around the edges
Sep 16, 2010
5,568
9
Scotlanda
When I added all the electrics and remote locking I just coiled the wire up under the dash, works fine, the original wire will run up the door pillar.

If everything else is spot on though I can't think what else it could be, definitely the correct frequency remote fobs?
 
Adrian Flux insurance services - discount for forum members.