So you saying several members above had batch with dodgy lid then? They should be sent more then seems unfair.
Recieved my kit today, from the instructions it looks quite simple to do. But i wont say anything until i actually start. Will be up early on saturday morning thats for sure!
Anyone got any tips/things to look out for?
So you saying several members above had batch with dodgy lid then? They should be sent more then seems unfair.
Heres my review on this product.
I recieved it perfect and next working day, non had evaporated or anything so i was happy at this step.
I washed my car and chose to do 2 chips on the door and a few on the bonnet just to test it out. I used panel wipe to make sure the chips were clean then proceeded with applying the first coat with the little brush provided and smoothed out so its touch dry with finger.
Before paint
Door:
Bonnet:
After paint
Door:
Bonnet:
Then i let it dry for about 2 mins and put a small amount of blending solution on the kind of paper towel provided and beginned to rub very lightly. It takes a little while until the blending solution starts to remove paint, but as soon as it down, it keeps coming off very fast so you need to go even lighter then.
After blending
Door:
Bonnet:
I was going to do a second coat but i thought i would see what just one coat would come out like.
Applyed polish
Door:
Bonnet:
Left the polish to dry to a haze then buffed off.
Buffed off
Door:
Bonnet:
I must say, its not quite as good as i was expecting (but ive only done one coat anyway) but its certainly better. Also remember this pictures are extremely close up so from a slighty further distance, it would look better. Also i should note again, this is only one coat of paint so i would say a good 2-4 coats would fill it properly which ive yet to do as it was getting a bit chilly outside.
The colour match seems spot on so im sure with a good afternoon for a couple of hours, you could get it looking very near perfect