Cupra R210 and ABT tuning

[hustle]

http://www.youtube.com/watch?v=W6kcnRoSUN8
Seems like ABT is being the official tuner for cupra engine?

 

[sly200sx]

Like the side decals.. Wonder if their tuning is just a software remap..?

 

[VRSfab]

yes it is just the tuning box

 

[phil_monk31]

0-60 in 6.8 seconds.......... thats slow lol

mines 5 seconds flat.

 

[mardon]

Yeah I think 6.8 is an underestimate! Makes the leon look slow, probably why they have done than, and for insurance

 

[grant 123]

0-60 in 6.8 seconds.......... thats slow lol

mines 5 seconds flat.

i did 6.83 with a completly stock car(even left spare full size wheel in), and a bad start.

 

[Spurt]

i did 6.83 with a completly stock car(even left spare full size wheel in), and a bad start.

Really? Can't have been a bad start. How do you get a bad start in an auto did you stall? Lol

 

[TSI BOY]

How do you get a bad start in an auto did you stall? Lol

 

[grant 123]

Really? Can't have been a bad start. How do you get a bad start in an auto did you stall? Lol

it was at trax, they had 0-60 time setup. but they have a sensor connected to your rear wheel, and i was scared of it rolling forward and starting the sensor. had to hold it on the handbrake, wasnt a good get away.

If only you would rev these cars to 1,500rpm or so for a launch they would be mega quick for what they are. Shame about the dry clutch.

 

[Cougar]

it was at trax, they had 0-60 time setup. but they have a sensor connected to your rear wheel, and i was scared of it rolling forward and starting the sensor. had to hold it on the handbrake, wasnt a good get away.

If only you would rev these cars to 1,500rpm or so for a launch they would be mega quick for what they are. Shame about the dry clutch.

Mhmmmm... Launch control for the Cupra's/Boc's as standard in future...

 

[nightflight]

Anyone else find the presenter really painful to watch?

 

[Spurt]

it was at trax, they had 0-60 time setup. but they have a sensor connected to your rear wheel, and i was scared of it rolling forward and starting the sensor. had to hold it on the handbrake, wasnt a good get away.

If only you would rev these cars to 1,500rpm or so for a launch they would be mega quick for what they are. Shame about the dry clutch.

bit nervous aye happens to us all, where all the time gets lost

 

[Elliot29]

it was at trax, they had 0-60 time setup. but they have a sensor connected to your rear wheel, and i was scared of it rolling forward and starting the sensor. had to hold it on the handbrake, wasnt a good get away.

If only you would rev these cars to 1,500rpm or so for a launch they would be mega quick for what they are. Shame about the dry clutch.

Hello Mate!! IM guessing it was you I spoke to at Trax I did another run later and got it down to 6.48 seconds I've only got a forge induction kit, rest standard

I was happy with that time

 

[grant 123]

Hello Mate!! IM guessing it was you I spoke to at Trax I did another run later and got it down to 6.48 seconds I've only got a forge induction kit, rest standard

I was happy with that time

Yeh, it was me.

Thats a pretty good time. The lighter weight wheels, and intake must make a difference. did you use S-Mode or Manual?

 

[VRSLOZ]

I did 6.58 in the Fab @ Inters and that just had the Revo replacement filter so the boc should be just as quick in standard form

 

[grant 123]

I did 6.58 in the Fab @ Inters and that just had the Revo replacement filter so the boc should be just as quick in standard form

is there even much to be gained from the revo filter?

 

[Elliot29]

Yeh, it was me.

Thats a pretty good time. The lighter weight wheels, and intake must make a difference. did you use S-Mode or Manual?

Yer they must of done Believe it or not i was in sport with the tc on, wish I had more runs, manual with tc off sounds like the better option

 

[VRSLOZ]

is there even much to be gained from the revo filter?

Nothing to be honest but was a present. For a cheaper alternative just take the sock off the OEM filter.

 

[grant 123]

Nothing to be honest but was a present. For a cheaper alternative just take the sock off the OEM filter.

surely the revo filter will be washable though, so i suppose over a 3year+ period it will kinda pay for itself... Thats my excuse.

Might have a go at making a closed induction kit like the forge one, but much cheaper.

 

[VRSLOZ]

I was wondering if something universal would be able to do anything like the Forge kit. You can pick up something like THIS cheap.