DIY Retrofitted Door Handle withg lights

[Antera]

Hello,

I saw the lights in de doorhandle off a Golf 8 and i wanted this also on my car. Because this was 1 part of the project i already made a manual so everybody can fitt those.

Link to Manual


Link to short movie for door lights

 

[KoNG]

Great thanks for sharing

 

[witek_77]

@Antera I heard you're doing a Kessy entry. I saw ready-made sets for the Golf 8. I also saw a set with glowing door handles. I'm wondering whether to make it myself. Golf door handles probably don't fit. but it is much easier to buy from Formentor.

 

[Antera]

Read my manual

Golf are the same as leon/formentor /id3

Only kessy is a issue cant figure it out on wich pin to connect on the kessy module and how to code. No adaption for the rear

 

[witek_77]

Read my manual

Golf are the same as leon/formentor /id3

Only kessy is a issue cant figure it out on wich pin to connect on the kessy module and how to code. No adaption for the rear

I dont have acces for your manual door handlees have different number on ETKA. If is the same i will buy on Ali for all door. Tomorrow I'm coming back to Poland from vacation and I'm going to start blind spot. I already have all the parts. later I'll probably take Kessy to the workshop.


Link is for tpms

 

[Antera]

Sorry link fixed

 

[witek_77]

Sorry link fixed

so now we are waiting for the extension of this tutorial to launch Kessy? have you mount the antennas and the module somewhere ? Have you changed the module ? what about immo? is obd11 enough? I also have passthru and VCtool and odis S based on this passthru unit

 

[Antera]

I already have kessy at the front. So dont changed this. Put only rear doorhandles woth kessy and lights and wiring inside the car but dont now where to connect the rear. Iff connect to the front one kessy stops working

No coding needed also for the lights. The connected to the lights in de mirrors

So this manual is for 90% for the lights. But there are no door handles without kessy but with light that is why i have them at the rear also and that is why i want to get those working

 

[witek_77]

I dont have i think i need to change module. I have 5WA 959 436 B. But i'm not sure. I want only front +lights. Like your car nów.

I already have kessy at the front. So dont changed this. Put only rear doorhandles woth kessy and lights and wiring inside the car but dont now where to connect the rear. Iff connect to the front one kessy stops working

No coding needed also for the lights. The connected to the lights in de mirrors

So this manual is for 90% for the lights. But there are no door handles without kessy but with light

 

[Antera]

Module i got with the handles is 5WA959436Q (Audi Q4) and The module in my car ( with front kessy) is 5WA959436C. So i think my OEM module cant work with rear kessy.